Something missing?

cjthor · Post by **cjthor** » July 14th, 2005, 1:40 am

See if you can figure it out...

mx almere · Post by **mx almere** » July 14th, 2005, 3:45 am

That is a lot of empty space.. I would almost say you have enough room for an engine.

V8KOMX3 · Post by **V8KOMX3** » July 14th, 2005, 4:01 am

can we get a hint? lol what's the deal there where is the engine?

cjthor · Post by **cjthor** » July 14th, 2005, 10:54 am

Well a shop that shall remain namless overboosted my car and needless to say its time for a rebuild. Going for a B6DE/B6T hybrid motor. SHOULD be back in my garage in 12 days.....hopefully.

nos92mx3 · Post by **nos92mx3** » July 14th, 2005, 11:31 am

b6t bottom end and a b6de head?
You wouldnt happen to have another b6de intake manifold would you?

cjthor · Post by **cjthor** » July 14th, 2005, 2:03 pm

nos92mx3 wrote:b6t bottom end and a b6de head?
You wouldnt happen to have another b6de intake manifold would you?

I would. I took the VIRS system out of it and it needs one weld where the VIRS bar went thru the end. Pretty simple thing. Where are you from?

nos92mx3 · Post by **nos92mx3** » July 14th, 2005, 2:56 pm

upstate ny. I just want to be able to replace the b6t intake manifold so i can buy a carbon fiber hood and get rid of the ugly a-- hood scoop.

Tunes67 · Post by **Tunes67** » July 14th, 2005, 3:32 pm

I just want to be able to replace the b6t intake manifold so i can buy a carbon fiber hood and get rid of the ugly a-- hood scoop.

Check with TEAMPk.. he just went through the same thing.. he bought my spare B6DE intake and he said he couldnt make it work so he had to stay with the hood scoop. I am sure he can explain why far better than I could. Cheers

Tunes67

nos92mx3 · Post by **nos92mx3** » July 14th, 2005, 3:38 pm

Tunes you kill my hopes and dreams.

Just playin, but yea ill definatley give him a pm.
Thanks

cjthor · Post by **cjthor** » July 14th, 2005, 5:55 pm

Yup the B6DE intake does not fit the b6t head...sorry!! I will look at my b6t head and b6de intake and see how far off they are.

nos92mx3 · Post by **nos92mx3** » July 14th, 2005, 6:03 pm

That would be great.
Maybe you could post up some pics of them ?

Gro Harlem · Post by **Gro Harlem** » July 14th, 2005, 8:09 pm

wtf is up with that axle? its ridiculously thick yet it has that weakpoint near the joint.

BTW: wher'ed u get ur axles? how much?

cjthor · Post by **cjthor** » July 14th, 2005, 8:45 pm

Gro Harlem wrote:wtf is up with that axle? its ridiculously thick yet it has that weakpoint near the joint.

BTW: wher'ed u get ur axles? how much?

Driveshsaftshop.com level 3 axle. SUPPOSEDLY will handle 500 ponies....we will seeeee. I dont remember the price actually.

chasman · Post by **chasman** » July 14th, 2005, 11:35 pm

That axle is big in diameter but hollow so it will actualy twist a little to prevent torque steer. You know the sudden left turn when you floor it.

cjthor · Post by **cjthor** » July 15th, 2005, 1:42 am

chasman wrote:That axle is big in diameter but hollow so it will actualy twist a little to prevent torque steer. You know the sudden left turn when you floor it.

That was the idea when building it. Since I decided to go with a one piece PS axle this was the best way to prevent torque steer. That and the Mazdaspeed LSD.