Which injectors for turbo 4 cylinder? (look inside)

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
User avatar
nos92mx3
Supporting Member
Posts: 1303
Joined: November 21st, 2003, 2:01 am
Location: Farmington,NY

Post by nos92mx3 »

ok now i have a question.
I know that the auto tps is variable, anyone know how i would hook up the 4th wire to the safc2 so it would read variable?
92' Rs-t b6t/De - RIP

93' Rs-t BPT - Sold

03' WRB wrx Wagon - Current
User avatar
facko
Regular Member
Posts: 224
Joined: February 27th, 2005, 1:25 pm
Location: beaufort, sc
Contact:

Post by facko »

thx for that clarification guys
BP swap -- Pacesetter Header -- Custom CAI -- Custom 2.5 Exhaust w/ a Thrush Glasspack and 40 Series Flowmaster -- SPEC Stage 2 Clutch Kit
User avatar
Josh
Supporting Member
Posts: 3432
Joined: April 18th, 2002, 2:01 am
Location: Washington state
Contact:

Post by Josh »

im running 310cc injectors @ 15psi, and im not maxing them out yet. close but not quite there.

the 1.8 injectors (220cc) i couldent run over 4500 RPM, at full fuel pressure at 7 to 8 psi, it would lean way out.
forcedairram
Regular Member
Posts: 132
Joined: February 28th, 2005, 2:02 pm
Location: Stuarts Draft
Contact:

ok

Post by forcedairram »

what turbo are you running because the 16G flows alot more cfm than the vj-14s and vj-11s, fuel injector size depends alot on the turbo. like i said im maxing out 440s at 10psi
Post Reply

Return to “Forced Induction”