no idle

goldsberry1 · Post by **goldsberry1** » May 31st, 2005, 9:20 pm

ok i reinstalled my intercooler pipes and changed out two temp sensors. now when i start it it dies unless i keep it the rpms up. it will die right away if i dont. i adjusted the idle screw on the im and got it to idle for a little bit but it still died. then i started it back and it was doing what it was before. i mean it ran with the turbo pipes before so i dont understand. if i cant figure out whats wrong soon i'm going to sell this and get a honda civic. i bet they are easier to work on.

jschrauwen · Post by **jschrauwen** » May 31st, 2005, 10:05 pm

Sounds like a question for the boosted guys and in particular for Steve (babybluemx3). FWIW, I may want to try a TPS adjust or maybe put it into diag mode and re-adjust the idle screw again and see if it takes or is recognized by the ECU. Just a wild guess.

goldsberry1 · Post by **goldsberry1** » May 31st, 2005, 11:32 pm

well the turbo isnt really in. right now its waiting to be rebuilt so i'm just running the intercooler and pipeing. so the engine is actually n/a right now