My 93 MX-3 GS 5 speed (several pics)

93SOHC · Post by **93SOHC** » April 22nd, 2005, 12:08 pm

some how I must have missed the post yesterday. Lookin real good Cory! I'd like to think I had a bit of influence on the Gun metal rims (after you saw mine, LOL) Don't drive your mx-3 to work, isn't that what you bought that crappy s-10 for

? Keep up the good work bro, can't wait to see it with the finished bumper!

OptiX · Post by **OptiX** » April 22nd, 2005, 12:41 pm

that bumper looks nice on her.
but definately DEFINATELY needs a good rince off, engine too

dave1970p · Post by **dave1970p** » April 22nd, 2005, 2:48 pm

hey guy to make that actually a cold air intake you need to build something to put over the hole where the tubing goes down into. then seal it with some gasket sealer. its easier to get off when you have to clean the filter. the way you have it now your still getting hot air from inside your engine bay. (take the car out and get it to running temp and put your hand on the cold air intake tubing, its going to be hot, after you seal it off like described above do the same thing get the car hot and touch the tubing. this time your going to be very suprised at how cool it is, thus getting its name cold air intake.) you may also wish to cut a hold in the bottom of the panel. then underneath the car build something out of sheet metal that will catch air and push it up to the filter. my kit came with one of those. also you have to relocate your overflo for the coolant. just a suggestion though.