just wondering if anybody has done it???
Looking for a rough cost on doing it
thx
converting a auto to a 5spd
-
- Regular Member
- Posts: 40
- Joined: April 26th, 2004, 2:01 am
- Location: Sudbury, ON , Canada
- atlantamx3
- Supporting Member
- Posts: 2888
- Joined: June 2nd, 2001, 2:01 am
- Location: Kennesaw, Ga, USA
- Contact:
I have done it.
If you get all of your parts from the junkyard- you should be able to do it for under $1000 for sure.
Here is my parts list from my swap: (Includes a Motor swap as well)

Here is my journal of the swap- complete with pics:
http://www.atlantamx3.com/mocaforum/viewforum.php?f=10
Good luck!
If you get all of your parts from the junkyard- you should be able to do it for under $1000 for sure.
Here is my parts list from my swap: (Includes a Motor swap as well)
Here is my journal of the swap- complete with pics:
http://www.atlantamx3.com/mocaforum/viewforum.php?f=10
Good luck!
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
I remember someone said $600 (US) bucks for such a swap
That is if everything is used
If you just buy the tranny used and get everything new, it should cost about $1000.
That is if everything is used
If you just buy the tranny used and get everything new, it should cost about $1000.
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Regular Member
- Posts: 194
- Joined: January 22nd, 2005, 11:38 am
- Location: Philly
- Contact:
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
I got 5 questions for youphillyMX3mayn wrote:cost me $500 last summer
1.) Did you do a engine swap at the same time?
2.) Where did you get the parts from (tranny, clutch, flywheel, ect)?
3.) Brand new parts or used?
4.) How long did it take you (in days/hours) to do the swap?
5.) How much expirence did you have before doing the swap?
just curious
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Regular Member
- Posts: 194
- Joined: January 22nd, 2005, 11:38 am
- Location: Philly
- Contact:
1.) No.Juans_93_MX3 wrote: I got 5 questions for you
1.) Did you do a engine swap at the same time?
2.) Where did you get the parts from (tranny, clutch, flywheel, ect)?
3.) Brand new parts or used?
4.) How long did it take you (in days/hours) to do the swap?
5.) How much expirence did you have before doing the swap?
just curious
2.) Ebay.
3.) Used.
4.) 4 hours a night for 4 nights.
5.) I had almost no experience while my 17 yr old friend who's dad is a mechanic did most of the work.
Best of luck.
-Steve