Help Code 69

drftking · Post by **drftking** » March 5th, 2005, 5:05 pm

I just did the paper clip diagnostic and i got a code od 09 and 69 I cant fing code 69 any where please help

Grants · Post by **Grants** » March 5th, 2005, 5:20 pm

Code 69 is the water thermosensor, same as 09. Temp gauge working?

mxmaz · Post by **mxmaz** » March 5th, 2005, 5:21 pm

code 69 is coolant thermosensor, 2nd last page of this link.
http://www.mx3er.com/Info/Diagnostic%20 ... mplete.pdf

babyblueMX3 · Post by **babyblueMX3** » March 5th, 2005, 5:21 pm

code 69 means you need to get layed

.. j/k

drftking · Post by **drftking** » March 5th, 2005, 5:28 pm

Temp gauge working. So i Guess all i need to do is chage the coolant temp sensor.
THX

Chopperpozz · Post by **Chopperpozz** » March 7th, 2005, 8:26 pm

the gauge runs off of a third one wire sensor and has nothing to do with the thermosensors. make sure u get the mazda sensors don;t go for hte aftermarket because u might get the wrong one. there like 45 bucks from mazda

lucky13 · Post by **lucky13** » March 11th, 2005, 11:04 pm

i got the same thing. drftking do you ever change the sensor. I have no clue to where it's at. the link does not work for me.

hgallegos915 · Post by **hgallegos915** » March 11th, 2005, 11:58 pm

remember that u got the klde and a k8 ecu..maybe thats the source of the problem.

hgallegos915 · Post by **hgallegos915** » March 29th, 2005, 8:03 pm

now I got code 69.. when i got the car from the shop, the tmp gauge was not working. There was a sensor that is for the gauge connected to the engine itself. Plugged it in started working. I removed the coolant temp sensor and the fan started woprking, put it and it would stop. I connected everything and turned car off (did not reset codes) ok so fan is turning on normally now gauge is working. I went for a drive, came back pull codes..code 69. Im going to reset codes. I know for sure its either the collant temp sensor or that sensor that is a little copper stick and a connector comes out. Its the one next to the injector the little black one.

ill reset codes and let you know what happpened.

jschrauwen · Post by **jschrauwen** » March 29th, 2005, 9:06 pm

babyblueMX3 wrote:code 69 means you need to get layed .. j/k

LMAO

hgallegos915 · Post by **hgallegos915** » March 29th, 2005, 9:24 pm

well yeah I do need to by a new gf

haha anywho cleared codes and its all good.

code 69 is for that little black connector and the coolant temop sensor.