Setting the TPS manually ..the FAQ is gone

hgallegos915 · Post by **hgallegos915** » February 7th, 2005, 3:16 am

Ok I know I use the multimeter but dont know where to stick it in

ANd also the reading...what spoecifically should I do. I was reading probetalk forums but not sure if its the same way....and watch for the fan to turn? hmm my rpms drop to zero then comeback..in probetalk according to them it was the tps sensort needing adjustment and they had the same problem as me. Can anyone tell me how to set my tps please. I feel this can be the cause of one of my many power robbing problems. I can tell because as I accelerate I get a boost sometimes..and sometimes i wont . I tried the faqs but the link is broken.

IanL · Post by **IanL** » February 7th, 2005, 4:24 am

What have you got against the online manual

Page F2-150

hgallegos915 · Post by **hgallegos915** » February 7th, 2005, 4:52 am

I never figured where and how to use it o.0

IanL · Post by **IanL** » February 7th, 2005, 7:17 am

OK, maybe this is a common problem:

Go to the homepage http://www.mx-3.com
In the LH column, click online shop manual.
Use the Choose a Section pulldown menu - in this case it's easy to see we need F2 (Fuel & Emission Control K8 ).
Now use the pages pulldown on the right - choose F2-1 for the index.
Scroll down and on the right, under Control System, we see the TPS at Page F2-150.
Choose that page, and bathe in a warm glow of achievement

Note you can scroll on or back through the pages with the wheel on the mouse.