Looking for torque

Kirill_na_PRESSO · Post by **Kirill_na_PRESSO** » January 19th, 2005, 3:33 am

Hi! I assemble my transmission. I should know the torque of the nuts of primary and second is shafts (it is encircled red). Someone does have manual? This is extremely necessary for me.

Thanks.

IanL · Post by **IanL** » January 19th, 2005, 4:17 am

Section J2 of the online manual.

Goto mx-3.com homepage and the link is on the left side.

Kirill_na_PRESSO · Post by **Kirill_na_PRESSO** » January 19th, 2005, 9:23 am

IanL, Thanks!

Doumo arigatou ^_^

Gro Harlem · Post by **Gro Harlem** » January 21st, 2005, 2:19 am

I didn't have the SST needed to keep the diff from turning, so I just hammered that nut with my impact gun set at about 75 ft lbs