Custom Projector light (01-03 Civic Aftermkt) pics

This forum is for discussion of topics relating to MX-3 lighting such as Headlights, Tail lights, Accessory Lights, Interior Lights, Etc. For example, Rear Euro Altezza Style Tail lights, Headlight units, LED's, HID's, Bulbs, Interior lights, Neons, Strobes, Auxillary Lights/Fogs or anything filament and gas discharge related.
Also anything dealing with the elctrical system.
Post Reply
User avatar
GregoryChristian
Supporting Member
Posts: 1413
Joined: March 4th, 2003, 2:01 am
Location: Gulf Coast

Custom Projector light (01-03 Civic Aftermkt) pics

Post by GregoryChristian »

I am currently working on a set of projector lights and have just finished today , scroll down to the very bottom of my cardomain page to see the results . what do you guys think ? I will try to take some pictures at night to see how they look ! :eek:

<small>[ May 11, 2004, 09:41 PM: Message edited by: JDM ]</small>
Top
maniac
Regular Member
Posts: 47
Joined: July 8th, 2003, 2:01 am
Location: ns, canada
Contact:
Contact maniac

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by maniac »

nice i didnt think i would like projectors on our cars but i sure like the looks of that.
Top
User avatar
lucky13
Regular Member
Posts: 333
Joined: April 7th, 2003, 2:01 am
Location: El Paso, TX

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by lucky13 »

I like it
Top
User avatar
Neil
Regular Member
Posts: 961
Joined: June 30th, 2003, 2:01 am
Location: Brandon Manitoba
Contact:
Contact Neil

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by Neil »

Very nice.

id put them on my mx. Very nice. :2thumbsup:
Ever notice anyone driving slower than you is an idiot and anyone driving faster than you is a maniac?
01-03 Civic Projector Swap Tutorial
Top
atx_mx3
Regular Member
Posts: 469
Joined: June 29th, 2003, 2:01 am
Location: austin, texas

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by atx_mx3 »

very badass! How long did that take?
1993 Mazda Mx-3 GS-Sold :(
1992 GS "The Bucket" Gone.
1993 GS 2.5 KLDE. Current daily.

92 GS 5spd for sale! Sold it....after I got a hatch cover in great condition :evil:
92 GS Auction Car, most expensive non-running mx-3 I have ever bought... Parted out and Crushed.

MY WORKLOG, check it out :) viewtopic.php?f=46&t=79959
Top
LooseChangeRacing
Regular Member
Posts: 535
Joined: December 11th, 2003, 2:01 am
Location: Middletown PA

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by LooseChangeRacing »

what projectors are they? what did you have to do to install...
http://www.cardomain.com/ride/2385931/4
Car Name - Elsie (LC)
Car Type - 92 Black RS Stock 190k
Car Name - (yet to be decided)
Car Type - 93 (soon Black) GS KLZE 130k
Top
User avatar
GregoryChristian
Supporting Member
Posts: 1413
Joined: March 4th, 2003, 2:01 am
Location: Gulf Coast

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by GregoryChristian »

Originally posted by LooseChangeRacing:
what projectors are they? what did you have to do to install...
They are from a Honda civic ( BLAH ) , I work at a body shop and saved them from being trashed .. :idea:
Top
SIXPACK
Regular Member
Posts: 195
Joined: December 20th, 2003, 2:01 am
Location: Denmark
Contact:
Contact SIXPACK

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by SIXPACK »

wow very nice work. got any night pics?
Black '92 GS - Pacesetter QuickShift w. SRD Extension rod Bushing + bronzoil - Top Speed Pro1 exhaust - Hotshot style headers - GTS coilovers - 18" ADR Sokudo gunmetal, f+r strutbar, floorbar & SRD crossmember
Top
Tyler17rose
Regular Member
Posts: 846
Joined: October 19th, 2002, 2:01 am
Location: Ottawa, Ontario, Canada
Contact:
Contact Tyler17rose

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by Tyler17rose »

They looks awsome. Did you gut the civic projectors and retrofit it to the stock headlights? or just trim the civic headlights to fit? Details details!
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.

new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
Top
User avatar
johnnyb
Supporting Member
Posts: 1079
Joined: January 26th, 2003, 2:01 am
Location: Brampton, On, Canada

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by johnnyb »

very nice indeed... gives it a supra look on the front end now
Image
Top
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by papa roached »

yea, details
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Top
Andrey
Junior Member
Posts: 20
Joined: March 24th, 2004, 2:01 am
Location: El Paso, Texas

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by Andrey »

those look nice ... but those dont look like mx-3 headlights :confused2: still look clean.. so how'd you do it?

<small>[ April 24, 2004, 08:39 PM: Message edited by: ConceptUSA ]</small>
Top
User avatar
GregoryChristian
Supporting Member
Posts: 1413
Joined: March 4th, 2003, 2:01 am
Location: Gulf Coast

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by GregoryChristian »

Originally posted by T-Rose:
They looks awsome. Did you gut the civic projectors and retrofit it to the stock headlights? or just trim the civic headlights to fit? Details details!
Too much of a hassle to modify the bumper and fenders so did the easy bake oven method , I placed the projectors in oven at 350 degrees until crispy , pried them apart at seams and measured them to the mx-3's... surprisingly not to much difference just larger and odd shaped at edges. I then cut off the excess sealed them back up ... I also had to take off some of the rear to fit it in the radiator support area. not bad for a days work , I think I may put a turn signal into the outer Projector housing ... not sure about the 3rd housing any suggestions ?
Top
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:
Contact mitmaks

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by mitmaks »

those do look awesome, someone make some for rest of us!!!!! :rant2:
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
Top
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Re: Custom Projector light (01-03 Civic Aftermkt) pics

Post by papa roached »

i would pay to have someone build a set
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
Top
Post Reply

Return to “Electrical & Lighting”