how do I take the lens off my altezza lights? I did a search but nothing came up.
thanks.
how too?
-
- Regular Member
- Posts: 295
- Joined: November 19th, 2001, 2:01 am
- Location: Edmonton,AB,CA
- Contact:
how too?
You can just call me the originator
Re: how too?
i believe most people have baked it in the oven to get the lens off. i know ive read a slew of them..... do a search under appearence>bake in oven

*note i will not be doing the rx7 hatch conversion, id rather get a BP*
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: how too?
i guess they would be the same as headlights right?
1. well what you do is heat up the oven to 250*F... takes a few min.
2. turn off the oven, and stick in your light (oven heat is off, just the temp is warming the housing).
3. wait 5-10 min and take it out.
4. with a knife or flathead screwdriver, pry off the lense cover. the glue or whatever has been heated up so you can do that.
enjoy
1. well what you do is heat up the oven to 250*F... takes a few min.
2. turn off the oven, and stick in your light (oven heat is off, just the temp is warming the housing).
3. wait 5-10 min and take it out.
4. with a knife or flathead screwdriver, pry off the lense cover. the glue or whatever has been heated up so you can do that.
enjoy

92 Autozam AZ3
- David Witherow
- Regular Member
- Posts: 847
- Joined: February 1st, 2001, 2:01 am
- Location: Brampton/London Ont
- Contact:
Re: how too?
i used a hairdryer and a screwdriver.....just go slowly you may crack the lens
Re: how too?
Yeah unfortunately I used a hair dryer as well it works umm but it is better to use the oven. But I know how it is mom doesn't want you to so use a heat gun or a blow dryer make sure you seal those up with cylicone. I dont know just my 2 cents.
Loveing cars isn't buying stickers and throwing them all over your ryde. LOL That was gone with Fast and the Furious. HAHA if thats your story, sorry
!!!
