MOMO Install

Johns93GS · Post by **Johns93GS** » October 8th, 2003, 6:44 pm

Well my MOMO wheel is sort of on...

I NEED HELP NOW

I got the wheel on, and got to the tricky part. The horn. Basically I need instruction on the wiring of the horn, and how to install it, from someone who has a MOMO on their car...

Please help guys!!

Spydie · Post by **Spydie** » October 8th, 2003, 7:18 pm

it should be just 1 wire

Tyler17rose · Post by **Tyler17rose** » October 8th, 2003, 9:06 pm

Mines confusing aswell. I had Cruise before and removed the circle thing that had the cruise connection on it. And then tried connecting the one wire that remained as my horn and it didnt work. My guess is that the wire comming off the cruise control also has something to do with the horn. Someone that has a Momo or aftermarket wheel with a working horn (that means you dont count Darren :p ) Please explain this to me!

Spydie · Post by **Spydie** » October 8th, 2003, 10:05 pm

i count because i've done it before....just not this time....with my wheel....with my car....yer right I don't count

<small>[ October 08, 2003, 09:30 PM: Message edited by: Darren Hyderman ]</small>

Johns93GS · Post by **Johns93GS** » October 9th, 2003, 3:58 pm

MX3 Quebec, Jeff Abrams, Kevin Gettens, they have them... too bad they don't post much. I will PM each of them to see if they can help us out

jwillistyl55 · Post by **jwillistyl55** » October 9th, 2003, 5:15 pm

ive heard it is illegal to have an aftermarket steering wheel cuz it disengages the air bag is that true its the only reason i havent be shoppin for one does anyone know the regs for them?

cody

Johns93GS · Post by **Johns93GS** » October 9th, 2003, 5:22 pm

You dont HAVE to have airbags...

93s dont have airbags anyway

Tyler17rose · Post by **Tyler17rose** » October 9th, 2003, 9:19 pm

I never had airbags or ABS

.

Casino · Post by **Casino** » October 15th, 2003, 2:31 am

me either
just makes driving that more interesting lol

Spydie · Post by **Spydie** » October 16th, 2003, 8:45 pm

I am solving the no horn dilema as we speak.
I am ripping out the OEM horn alltogether. Not a great horn anyway...(meep meep)
I'm going to install a 2 tone (hi/lo) snail horn. It's actually 2 seperate horns 1 high the other low. They are red and chrome...very nice, so I'm going to mount 1 on each side of the engine bay in a visible local.
It's a single wire from the wheel to a relay to the 2 horns. it blasts like 130db.

MOVE OVER GRANDMA!!!!!!

<small>[ October 16, 2003, 07:50 PM: Message edited by: Darren Hyderman ]</small>

Tyler17rose · Post by **Tyler17rose** » October 16th, 2003, 10:00 pm

Sweet man! You gota show me that when its all hooked up. Then we can go around scarin kids haha.

Tyler17rose · Post by **Tyler17rose** » October 16th, 2003, 10:06 pm

Oh and ive made some progress on the horn. Ive figured out that there are 3 rings on the steering column that the momo hub slides onto. These three rings are somehow related to cruise on and off and the horn. And are divided by little plastic rings. If i take a wire and connect the top ring to the middle ring i get the horn. (at this point i'm sure all my neihbors were getting ticked off) So i just slapped the wheel back on for now.

So now i know i need to make one of those 2 rings come in contact with the momo hub and we should have a working horn! I'll try this out soon and get back to you guys.

MX-3.com

MOMO Install

MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install

Re: MOMO Install