antifreeze boils over

V6 Technical/Performance Discussions
Post Reply
lwes
Junior Member
Posts: 4
Joined: June 20th, 2003, 2:01 am
Location: Calgary,AB,Canada

antifreeze boils over

Post by lwes »

Hey, when I drive my car for a bit it will start to idle high when it gets hot. The temperature guage reads normal at medium. Sometimes I can kick it down from idling high. But my antifreeze still boils over. I tried spraying the throttle with wd40, but now I'm thinking that it has to be something else. Has anyone had the same problem, can you please help me.
User avatar
mazdasly75
Regular Member
Posts: 32
Joined: October 19th, 2001, 2:01 am
Location: Trois-Rivières, QC, Canada

Re: antifreeze boils over

Post by mazdasly75 »

First? what's engine you are running? 1.8 or 2.5 and what millage?<p>it may be a misfonction of the thermostat. It could be also, a damaged impaler's water pump.<p>Need more information of your setup :shrug:
1996 MX3, KL, stock internal, T3T4, 10psi, tial wastegate and blow off, 450cc injectors, 255lph, 3" mandrel bend exaust, 67mmTB, megasquirt II, launch control/flat shift, boost controler, 4bars MAP 16x16 built in, 300whp
Image
User avatar
mazdasly75
Regular Member
Posts: 32
Joined: October 19th, 2001, 2:01 am
Location: Trois-Rivières, QC, Canada

Re: antifreeze boils over

Post by mazdasly75 »

Oh, and the temperature readout sucks. Don't look at it anymore.
1996 MX3, KL, stock internal, T3T4, 10psi, tial wastegate and blow off, 450cc injectors, 255lph, 3" mandrel bend exaust, 67mmTB, megasquirt II, launch control/flat shift, boost controler, 4bars MAP 16x16 built in, 300whp
Image
killerpickle
Regular Member
Posts: 733
Joined: January 16th, 2001, 2:01 am
Location: Niagara Falls, Canada
Contact:

Re: antifreeze boils over

Post by killerpickle »

I would check your upper rad hose and other rad hoses for leaks or signs of leakage. A leak in your upper rad hose can cause your temp gauge to shoot up and down, and also can empty your overflow. I fixed mine a few months ago, this was the problem. I can't say I saw boil over though. That could be your head gasket pressurizing the coolant system....
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
lwes
Junior Member
Posts: 4
Joined: June 20th, 2003, 2:01 am
Location: Calgary,AB,Canada

Re: antifreeze boils over

Post by lwes »

I have a 1.8l v6 with 150 000k. I will take a look for a leak in the hose. A few months ago I got my thermostat replaced so i don't think its that unless it isn't working properly. thanx
Post Reply

Return to “V6 Technical/Performance”