Sup,<p>Well, today I had my front right bearing fixed...a new one rather. For the last 2 months I had to put up with a loud...VERY loud airplane kinda sounds emitting from my front right wheel well. Im just posting this so that if someone else has this problem they could maybe self diagnose it... I had it repaired at midas. Total cost - part 80can - labour 90can allignment 40can. Hope this helps someone. <p>PS Tomorrow I am installing both o2 sensors, and I will have pics and instructions on my site soon after.
later guys..
repaired front right bearing
-
killerpickle
- Regular Member
- Posts: 733
- Joined: January 16th, 2001, 2:01 am
- Location: Niagara Falls, Canada
- Contact:
repaired front right bearing
Tom Alexander
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
93 MX3 GSR - KLZE / stage 3 clutch / PRM Intake / 2.25" exhaust - dual 3" outlet
full custom black and red interior / KLZE ECU / JE50 VAF
http://home.cogeco.ca/~mx3/ - updated dec 1/03
-
wannamjd
- Junior Member
- Posts: 9
- Joined: September 14th, 2002, 2:01 am
- Location: Greensboro, North Carolina, USA
- Contact:
Re: repaired front right bearing
I had the same thing happen with my old 93 GS, I thought it was an axle at first so I had them check it out but the axles looked fine, the noise was coming from the wheel bearing. They got the bearing for $60 us and installed for $115. That thing was LOUD! Almost as bad as when the muffler rusted out right behind the cat under my drivers seat.<p>Duncan Wannamaker
'93 Red GS V6 - Stock 130k miles, KLZE Soon!
-
cashmoneyspeed
- Regular Member
- Posts: 451
- Joined: March 25th, 2002, 2:01 am
- Location: chicago, IL
Re: repaired front right bearing
what type of o2 sensors did you install? how much did u pay?
SOLD - 93 GS Custom intake, exhaust, phenolic spacers, port matching, front upper strut bar, 17" wheels, dragon body graphics, black/white interior, sound system, tints, altezza tails & 3rd brake altezza, g-force front
'94 Caprice - rolling fast and low on 20's along with some custom goodies
'86 Regal - Hydraulics, custom wheels, custom paint, shaved, phantom top, leather, power, and lots of chrome
'92 - New import project in the works, should be out in '09
'94 Caprice - rolling fast and low on 20's along with some custom goodies
'86 Regal - Hydraulics, custom wheels, custom paint, shaved, phantom top, leather, power, and lots of chrome
'92 - New import project in the works, should be out in '09