Manifold Absolute Pressure/Barometric Pressure Circuit

DeanoGS · Post by **DeanoGS** » November 11th, 2002, 5:48 pm

This is the code readout i get on my 1.8l V6P0105 Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction Apparently this doesnt exist on these engines? Can someone tell me what this error is and what sensor it leads to?dean.zarrillo@mts.net

David Coleman · Post by **David Coleman** » November 11th, 2002, 6:19 pm

You'll note in the F2 chapter of the shop manual that it says to replace the ECU if you get this code...

DeanoGS · Post by **DeanoGS** » November 11th, 2002, 7:46 pm

CRAP!! Where does it say that? and can you please explain a little more as to why this is happening. Thank you.

DeanoGS · Post by **DeanoGS** » November 11th, 2002, 7:58 pm

The shop manual says replace ECU when u get code 14( bar. pressure .... ) i get code p0105, which isnt 14, but is : Manifold absolute pressure/ barometric pressure ciruit malfuntion.Im totally lost!

DeanoGS · Post by **DeanoGS** » November 12th, 2002, 9:51 pm

ANY one?? Help?

MX-3.com

Manifold Absolute Pressure/Barometric Pressure Circuit

Manifold Absolute Pressure/Barometric Pressure Circuit

Re: Manifold Absolute Pressure/Barometric Pressure Circuit

Re: Manifold Absolute Pressure/Barometric Pressure Circuit

Re: Manifold Absolute Pressure/Barometric Pressure Circuit

Re: Manifold Absolute Pressure/Barometric Pressure Circuit