Oxygen sensor not needed?

V6 Technical/Performance Discussions
Post Reply
chance
Regular Member
Posts: 293
Joined: June 1st, 2002, 2:01 am
Location: northern kentucky

Oxygen sensor not needed?

Post by chance »

My MX-3 GS has been running crappy lately. It seems like it trips over itself on take off and has very little power. I hooked it up to my buddy's scanner and it displayed codes 16 and 17. Code 16 is a bad left O2 sensor so I got another one off a junked Mx-3 and started to swap them. while doing this I had an idea. I took my car for a drive with the old sensor still in but unplugged. It ran great. I don't know how this could be. I assumed the car wouldn't even idle, but it runs great, smooth take offs and lots of power. <P>If someone with a good running car could disconnect their O2 sensor and let me know how it ran I would really appreciate it. Someone more knowing please write back.
User avatar
bugz
Regular Member
Posts: 147
Joined: April 15th, 2002, 2:01 am
Location: phoenix,arizona

Re: Oxygen sensor not needed?

Post by bugz »

my cars got some prob i wounder if thatll fix mine .. ill try it this afternoon an get back to u .. did u unplug from or back ..or both ?
92GS.KLze 2.5 ,CT26 TURBO,40K MILES,Ram air intake,2.5 cat back,coming.pullys,cams,Pistons,
valves & springs,venom injectors.
User avatar
Buff1110
Supporting Member
Posts: 588
Joined: February 26th, 2001, 2:01 am
Location: Howell, NJ, USA

Re: Oxygen sensor not needed?

Post by Buff1110 »

watch out though because bad o2 sensors = bad gas mileage<BR>no o2 =???<BR>Dan
Dan
92 Mx-3 Gs, KLZE Powered!! - SOLD!!!!
02 Tacoma TRD - Daily
93 Honda del Sol - New Project
Mike 94PGT
Regular Member
Posts: 32
Joined: December 21st, 2001, 2:01 am
Location: Canada
Contact:

Re: Oxygen sensor not needed?

Post by Mike 94PGT »

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by chance:<BR>[QB]My MX-3 GS has been running crappy lately. It seems like it trips over itself on take off and has very little power. I hooked it up to my buddy's scanner and it displayed codes 16 and 17. Code 16 is a bad left O2 sensor[/b]<HR></BLOCKQUOTE><P>Code 16 is an EGR fault, not an O2 sensor. O2 sensor codes on OBD-I cars are 15, 17, 23 and 24.<P>You sure you read 16?
Mike<BR>94 PGT <A HREF="http://home.golden.net/~trinity" TARGET=_blank>Codes, Maint, MAF, PCMs etc...</A><BR>Supermoderator, mx6.com
User avatar
bugz
Regular Member
Posts: 147
Joined: April 15th, 2002, 2:01 am
Location: phoenix,arizona

Re: Oxygen sensor not needed?

Post by bugz »

i pulled front o2 sencer ran little better then removed sec an ran like crap.. be nice if we dont need them
92GS.KLze 2.5 ,CT26 TURBO,40K MILES,Ram air intake,2.5 cat back,coming.pullys,cams,Pistons,
valves & springs,venom injectors.
pelado
Regular Member
Posts: 1179
Joined: August 27th, 2001, 2:01 am
Location: Russellville, AR, USA

Re: Oxygen sensor not needed?

Post by pelado »

O2 sensors aren't all that expensive. Go to Nopi or <A HREF="http://www.oxygensensors.com." TARGET=_blank>www.oxygensensors.com.</A>
KLZE, ZE PCM, UR pulley, PS catback, PS STS, PRM, IAC bypass, 64mm TB, FOP hair gel
chance
Regular Member
Posts: 293
Joined: June 1st, 2002, 2:01 am
Location: northern kentucky

Re: Oxygen sensor not needed?

Post by chance »

I'm sorry, it read 16 and 17. 17 is the o2 sensor not 16. I only pulled the front one.<BR>Better gas mileage or not it still runs considerably better. Tomorrow I'll put the other one I have in and see what that does. I just thought the whole thing was kind of interesting.
Post Reply

Return to “V6 Technical/Performance”