auto to manual swap
-
- Junior Member
- Posts: 19
- Joined: July 23rd, 2002, 2:01 am
- Location: pittsburgh, pa
auto to manual swap
Hey guys i have a 92 gs and i am plannin on doin a tranny swap because i have heard the manual is better. Well anyway i was just wonderin if anyone could give me a list of things i will need to complete this swap. If someone could it would be greatly appreciated. Oh and also i am in need of all these items so i will post on the buy or sell bulletin for a tranny and the neccassary parts to do the swap. Thanks again
- MAZDASPEED STEVE
- Regular Member
- Posts: 380
- Joined: December 18th, 2000, 2:01 am
- Location: Guelph, Ontario, Canada
Re: auto to manual swap
try this <A HREF="http://www.geocities.com/bat_elof/tranny.html" TARGET=_blank>www.geocities.com/bat_elof/tranny.html</A> <BR>Good luck 

THANX
MAZDASPEED
STEVE
MAZDASPEED
STEVE
-
- Junior Member
- Posts: 19
- Joined: July 23rd, 2002, 2:01 am
- Location: pittsburgh, pa
Re: auto to manual swap
thanx but is there any way someone could tell me what the 1300 dollars in canadian is in american money taht is how much he said it would all cost<BR> [img]shrug.gif"%20border="0[/img]
- MAZDASPEED STEVE
- Regular Member
- Posts: 380
- Joined: December 18th, 2000, 2:01 am
- Location: Guelph, Ontario, Canada
Re: auto to manual swap
roughly $2000-$2100US.<BR>Save up an extra couple hundred, just in case you can't find some parts at a wreckers and have to buy them new. [img]shrug.gif"%20border="0[/img]
THANX
MAZDASPEED
STEVE
MAZDASPEED
STEVE
Re: auto to manual swap
I've done the swap on my GS, so if you need any extra info just message me or whatever. There are a few things that are going to catch you out if you don't do a lot of research first (I went back to my "local" mazda parts guy about 10 times in 4 days to get the right stuff) 

'93 MX-3 (Eunos Presso)<BR>Custom Intake<BR>10mm ignition leads<BR>Straight through exhaust (no cats)<BR>Automatic->Manual trans. conversion