i mean from the top of the seats, to the floor, and from the narrowest points on the drivers and passenger sides
ive got a big boomin stereo system planned for my upcoming mx-3
Ft^3
Ft^3
does anyone know how many cubic feet are available in the hatch area of an MX-3 with all the seats in their original place?
i mean from the top of the seats, to the floor, and from the narrowest points on the drivers and passenger sides
ive got a big boomin stereo system planned for my upcoming mx-3
i mean from the top of the seats, to the floor, and from the narrowest points on the drivers and passenger sides
ive got a big boomin stereo system planned for my upcoming mx-3
-
BumpNGlow
- Regular Member
- Posts: 838
- Joined: November 26th, 2001, 2:01 am
- Location: Edwardsville, IL
- Contact:
Re: Ft^3
if you are leaving your panels on and you aren't going to fiberglass you can probably get like 4.5 cubes after displacements. (that's a straight square box). If you get intricate you can get quite a bit more.
FOR SALE, AS A PARTS CAR
1994 Mazda MX-3 <-- 152dB's w/ 1 15
> Invited to '02 USACi World Finals, but did not compete due to stock alternator problems.
> Can't go to '03 USACi World Finals because I HAVE NOTHING LEFT!!
1994 Mazda MX-3 <-- 152dB's w/ 1 15
> Invited to '02 USACi World Finals, but did not compete due to stock alternator problems.
> Can't go to '03 USACi World Finals because I HAVE NOTHING LEFT!!
damn, i was hoping to get more around 6ft...ah well, i guess i can always work with what i have-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Ft^3
You can use Polyfill to trick the sub into thinking it has more space to work with....
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
Re: Ft^3
if u build a box that is a square u can get around 5 like this one... (my box that i still have that i would sell)
<img src="http://www.firststatebmx.com/other/IMG0138.JPG" alt=" - " />
<img src="http://www.firststatebmx.com/other/IMG0139.JPG" alt=" - " />
<img src="http://www.firststatebmx.com/other/IMG0141.JPG" alt=" - " />
<img src="http://www.firststatebmx.com/other/IMG143.JPG" alt=" - " />
if u built it so it was angled like the back of the seat u could get as much as 5.7.
<img src="http://www.firststatebmx.com/other/IMG0138.JPG" alt=" - " />
<img src="http://www.firststatebmx.com/other/IMG0139.JPG" alt=" - " />
<img src="http://www.firststatebmx.com/other/IMG0141.JPG" alt=" - " />
<img src="http://www.firststatebmx.com/other/IMG143.JPG" alt=" - " />
if u built it so it was angled like the back of the seat u could get as much as 5.7.
-
lakersfan1
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: Ft^3
Try a measuring tape.Originally posted by boominx3:
does anyone know how many cubic feet are available in the hatch area of an MX-3 with all the seats in their original place?
i mean from the top of the seats, to the floor, and from the narrowest points on the drivers and passenger sides
ive got a big boomin stereo system planned for my upcoming mx-3
-
Tyler17rose
- Regular Member
- Posts: 846
- Joined: October 19th, 2002, 2:01 am
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Ft^3
mzdspd thats one crazy *** box! Everything just BARELY fits. Good work! Did you ever get that metered? Did you ever break anything with it? rattle things apart?
Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
Re: Ft^3
many many rattles. lol. no i never got it metered blew the head ghasket before i got a chance. u want the nox? ill give u a deal u can't refuse. e-mail me. clnzx2@yahoo.com
-
BumpNGlow
- Regular Member
- Posts: 838
- Joined: November 26th, 2001, 2:01 am
- Location: Edwardsville, IL
- Contact:
Re: Ft^3
yah, that's a bad *** box. I'm gonna try one close to that next year for 2 15s.
Kyle, hit me up on AIM some time w/ the measurements you used if you would be so kind my man. I haven't talked to you in awhile -- how's the zx2 coming along?
Kyle, hit me up on AIM some time w/ the measurements you used if you would be so kind my man. I haven't talked to you in awhile -- how's the zx2 coming along?
FOR SALE, AS A PARTS CAR
1994 Mazda MX-3 <-- 152dB's w/ 1 15
> Invited to '02 USACi World Finals, but did not compete due to stock alternator problems.
> Can't go to '03 USACi World Finals because I HAVE NOTHING LEFT!!
1994 Mazda MX-3 <-- 152dB's w/ 1 15
> Invited to '02 USACi World Finals, but did not compete due to stock alternator problems.
> Can't go to '03 USACi World Finals because I HAVE NOTHING LEFT!!
Re: Ft^3
its going great built a new box for my L7s today. best box i could get in the car. 4.4 cu ft after displacement common chamber sealed
that will bring me up to 4 and my voltage should stay above 14 
that will bring me up to 4 and my voltage should stay above 14 -
BumpNGlow
- Regular Member
- Posts: 838
- Joined: November 26th, 2001, 2:01 am
- Location: Edwardsville, IL
- Contact:
Re: Ft^3
you ever get a new alt from Dom?
FOR SALE, AS A PARTS CAR
1994 Mazda MX-3 <-- 152dB's w/ 1 15
> Invited to '02 USACi World Finals, but did not compete due to stock alternator problems.
> Can't go to '03 USACi World Finals because I HAVE NOTHING LEFT!!
1994 Mazda MX-3 <-- 152dB's w/ 1 15
> Invited to '02 USACi World Finals, but did not compete due to stock alternator problems.
> Can't go to '03 USACi World Finals because I HAVE NOTHING LEFT!!
Re: Ft^3
sold that pos with the car. so now someone has a 220A alt and don't even know it and prob have no nead at all for it
-
Mo s Ricer
- Regular Member
- Posts: 270
- Joined: September 18th, 2002, 2:01 am
- Location: rochester, new york
- Contact:
Re: Ft^3
hey mzdspd that custem box for the mx-3. are those 15"s? and how much you whant for the box? its beautiful
<small>[ October 10, 2003, 12:55 AM: Message edited by: Mo s Ricer ]</small>
<small>[ October 10, 2003, 12:55 AM: Message edited by: Mo s Ricer ]</small>
mosricer is powerd by mx-3's,gen2 mr2's and of course SUBARU'S.
Live Life One Ride At A Time.
Live Life One Ride At A Time.
Re: Ft^3
http://f1.pg.photos.yahoo.com/ph/mx3man83/vwp?.dir=/mx-3+updated&.dnm=My+little+bump+in+the+trunk.jpg&.view=t
Not sure how many cubic feet is but my box is somewhat big too. Just thought I'd post a pic
Not sure how many cubic feet is but my box is somewhat big too. Just thought I'd post a pic
Combat kit, Spectra blue paint, shaved, Black ADR flite 4 17's/ Yokahama ES 100's, straight through 2.5 inch cat back exhaust, CAI, Straight neck IM KLZE, poly filled motor mounts, Kl48/ Eprom chip, black altezzas, Wet Zex 75 shot, Walbro 255 fuel pump, Cosmo AFPR, GS SE all black interior, RF 1kbd amp, RF 12 HE2's (2), US acoustics 4 channel amp
My Cardomain site
My Cardomain site
Re: Ft^3
the subs in that box of mine are 12s. if u want ill take a trade or come and get it and its urs for 40