Alarm/Keyless/Rem Start...

[92MX3GS]

I'm thinking of looking for an Alarm/Keyless entry/ Remote start for my fiance's 92 MX3 GS (automatic tranny). And I have a couple of questions:<P>1. Her car (I'm not sure if all MX3's do this) will unlock both doors if you unlock the driver's side, but not the passenger side. I would like to get her keyless entry, but from the way the locks work, I'm assuming that there's no actuator to lock/unlock the driver's side. I know there is on the passenger side. Is there a way to put an actuator on the driver's side so that they keyless entry would unlock the driver's door and not just the passenger's door?<P>2. Most alarms come with a remote trunk pop. The trunk pop on her car feels like it's a cable, is this true? If it is, then that's out of the question.<P>Thanks!

[Maddbuck]

1. You are assuming correct, there is no acuator for the drivers side door, ran into that problem installing an alarm myself. After failing my install I went of the an alarm installation guy and he quoted me and alarm system and said I needed the drivers side actuator also.<P>2. The trunk pop is a cable so no trunk pop there but I found a website that sells an add-your-own trunk release unit which I installed on my MX-3 and it works great for me and I installed it so I can still use the cable release(did not want to use the press button that comes with it, only open it from remote).<P>The site is <A HREF="http://www.commandoalarms.com" TARGET=_blank>www.commandoalarms.com</A> <BR>you can buy all sorts of add-on goodies for your car there. You can also buy a universal door actuator there. I may buy the door actuator from them and try and install it myself soon because the alarm tech quoted me $70 bucks for the actuator. <P>Hope this helps out some.

[92MX3GS]

Thanks for the info! That lets me know that I can get an actuator for her car, but after getting in the door to repair the lock one time, I don't really look forward to getting back into the door anytime in the extremely near future.

[David Witherow]

they arent that bad to install i have them on both doors and they just attach the the rod attached to the lock. the hardest part is running the wires...