I need to get this sticker off!

General Mazda MX-3 Discussions
UoMDeacon
Regular Member
Posts: 195
Joined: December 27th, 2002, 2:01 am
Location: Ann Arbor, MI

Re: I need to get this sticker off!

Post by UoMDeacon »

You could always try using some isopropyl alcohol or something like that. Just dissolve it off.
william
Regular Member
Posts: 117
Joined: September 5th, 2002, 2:01 am
Location: Nova Scotia

Re: I need to get this sticker off!

Post by william »

definately use a heat gun or a hair dryer...but if it's on the bumber be careful you can melt it if you just leave it on...once the sticker is good and warm use a plastic razor blade and it will peel right off...I work at a dealership and this is what we do to get the big vynal decals off...
tk1138
Regular Member
Posts: 232
Joined: December 17th, 2001, 2:01 am
Location: Denver

Re: I need to get this sticker off!

Post by tk1138 »

Don't use WD-40 or gas on paint. Denatured alcohol, or Isopropel (rubbing) alcohol.<p>As to good smells, my wife likes xylene, toluene, & F2ClHC2 (circut board cleaner) but not kerosene or gas.
tk1138<P>There's not really anything I want to say over and over.
User avatar
Steeb
Regular Member
Posts: 1897
Joined: June 29th, 2001, 2:01 am
Location: CA, USA
Contact:

Re: I need to get this sticker off!

Post by Steeb »

i took a few stickers off my car with a razor. just be careful. they'd been on there for a couple years and had dried up and cracked but still sun baked on. i tried everything i had around. if u dont feel like scrubin the outlines yet dont worry, they come off after a couple car washes.
Post Reply

Return to “General Mazda MX-3”