MX-3.com

Great to deal with, goods arrived in expected timeframe.

Would deal with them again with no hestiation at all!

I've been driving around in my mx for about a year now with no fuel needle, time to fix it. I have a spare gauge cluser with a spare coolant needle, sorry to say but no fuel gauge to swap over :(, and electrics...was wondering if somebody could send me a pic of the rear of the fuel gauge assembly ...

Was sitting at the set of lights earlier today and this very strange, bizzare even, rattling noise started to come from the engine bay. I turned off my ac and the noise stopped, turned it back on it was back to normal.

Has anybody had something similar happen?

I attempted to replicate the ...

Anyone done this and is it worth doing?

Also the one's on sale on ebay, anyone tried these out?

Looks like I'm going to have to buy a whole cluster. The wreckers have one for $AU 110, that sucks but i guess it'll have to do. Thanks.

I had almost the exact same problem...it happened last week. Gunk all over my front three spark plugs.

I resealed the existing value cover gasket with some extra sealant, its sputtered for a my next drive. But after driving it about 20k all the sputtering went away and its now been a week without ...

MY mate broke my fuel gauge pin while installing my new gauges.

Do i take this to an automotive electricin or is this something i can take apart myself...

Also my rpm pin does not respond well, as the whole pin came out when removing the gauge dial. do i shove this back in hard or is there a ...

Hey guys,

Thanks for the replys.

Once I was able to see what i was doing, and i had my meter with me found that the battery was the culprit. Must have been the cold weather we've been having as of late, took almost all my charge from the battery, this made me think that it could be my ...

I was driving along no problems, a little cold the engine was. So I pull over to put a jumper on and let the car warm up a bit. I get my jumper on and the car just dies. :mad: My first thought is that my vaccume hose has leaked again but to my dismay... :eek:

I get back in and try to turn the ...

Thanks for explanation IanL. I'll try the automotive repair shop to see if they can replace it, otherwise Gro Harlem I'll take you offer up.

Friendlyhacker, I would personally put a small filter onto the hose...cause i don't think unfiltered air is very healthy even in small doses, as it adds up ...

Can somebody tell me why its there then in the first place, mazda must of had a reason to add extra junk to our cars, other than to jack up the price.

I've found, after some fumbling around with the vaccum hoses, that my front solenoid (pressure regulator control) that its sort of broke. This is the sensor that resides on the side of the original air filter box.

The side part where the tube is meant to connect has been severed, has been like ...

Thanks...please use this email instead...

frank@itaus.com.au

And thanks again.

I remeber somebody placing this up, but the picture is no longer visable. Can somebody please post it again or email me it?

Thanks.

I had a very simlar problem, the car would start for weeks then would have trouble for a day or two then fine again.

Then one day it would just crank and crank but not fire. Check your spark on your wires they should be a strong spark goes at least a cm. If this only has a tiny spark or a weak ...