Ah yes I completely forgot to post back. 
I found another mx3 that was being used for parts, stole the door pins out of that haha. 
I tried cleaning up the screw (the ground) on the old pins first, with no success. Throwing in the ones from the parts car worked like a charm however!
Thanks for the ...
					Search found 6 matches
- June 28th, 2016, 12:01 pm
- Forum: General Mazda MX-3
- Topic: Door light broken?
- Replies: 5
- Views: 5912
- May 1st, 2016, 1:35 pm
- Forum: General Mazda MX-3
- Topic: Door light broken?
- Replies: 5
- Views: 5912
Re: Door light broken?
Thank you both for the tips; I'll check that out today!
 
					
- January 5th, 2016, 11:04 pm
- Forum: General Mazda MX-3
- Topic: Sunroof lifter broken?
- Replies: 4
- Views: 4935
Re: Sunroof lifter broken?
 There's only one electric motor that does everything. You probably have either a lubrication problem, dirt/rust jamming something, or something worn out.
You will have to take off the roof lining, to then be able to see the mechanism and troubleshoot it, and eventually take it off the car, if ...
					You will have to take off the roof lining, to then be able to see the mechanism and troubleshoot it, and eventually take it off the car, if ...
- January 3rd, 2016, 8:56 pm
- Forum: Car Stereo/Alarm
- Topic: key hole light
- Replies: 8
- Views: 15125
Re: key hole light
I have the same problem on my '93 GS.... would like to get to the bottom of it as well..  
					
- January 3rd, 2016, 8:49 pm
- Forum: General Mazda MX-3
- Topic: Sunroof lifter broken?
- Replies: 4
- Views: 4935
Sunroof lifter broken?
To open the sunroof on my '93 GS, I have to push up at the back of the sunroof while using the button to open it. Is there a lifting device that could be jammed/broken? What's the best way to check? Thanks!   
  
					 
  
- January 3rd, 2016, 8:47 pm
- Forum: General Mazda MX-3
- Topic: Door light broken?
- Replies: 5
- Views: 5912
Door light broken?
On my 93 GS, the pin that triggers the door light is stuck in the 'closed' position. Has anyone had this problem? How do i get to behind it where the wiring is, and how should i be able to fix it? Any help is appreciated!   
  
					 
  