Okay i don't know if anyone has ever asked this before but i am trying to make my own cold air intake and wanted to know if anyone knowes how to bypass the oxygen sensor...it is kinda getting on my nerves because i know i would be able to do that if it were not for that damn thing...
But if anyone knowes or has any ideas please respond, thank you.
Oxygen sensor
Oxygen sensor
92' MX3 GS teal, mazdaspeed air intake, 15' Konig rims...soon to put about 6k into entire car, engine and exterior.
-
PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
You have to have it unless you want to spend about 2000 on a stand alone engine management system.
It is not that hard to incorporate into the CAI. Do a search for "CAI" or "cold air intake" or "engine bay" and you'll see many pictures that will show you how to mount it.
Home depot has plumbing commectors that are 2.5" to 3" that will go from your cold air intake tube that is 2.5" to the air flow meter that is 3". You will see what I'm talking about when you see the pics.
It is not that hard to incorporate into the CAI. Do a search for "CAI" or "cold air intake" or "engine bay" and you'll see many pictures that will show you how to mount it.
Home depot has plumbing commectors that are 2.5" to 3" that will go from your cold air intake tube that is 2.5" to the air flow meter that is 3". You will see what I'm talking about when you see the pics.
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP