MX-3.com

So a BP swap is in the works, yet before I even start to think about putting this bad boy in, it's not like it has to be done because my motor is running fine, i'm just building up to it. I'm looking for:
b6t rods
bp26 pistons
bp26 ecu
vj20 turbo
bp26 manifold
360cc black top injectors
bp26 wiring harness
rx7 b code air flow meter
new transmission
and an intercooler kit of sorts

Note: these wont all be bought at one time, im going to have to get a few things at a time due to a school budget.

If there is any other parts you would recommend feel free to tell me, this list was made from peoples recommendations

What tranny options are you considering? On clubprotege they sold me on the KIA Sephia tranny. It's a pretty straight swap. Essentially, It's just the G-series gearbox mated to a F-series bell housing. However, It's much beefier and can handle greater stresses. I have already done the swap and entertained the idea ov doing a write up, but laziness prevailed . If you got any questions about it, let me know and I will help all I can.

i have everything you need where are you located