Page 1 of 1
Wiper arm color/finish
Posted: February 7th, 2012, 6:42 pm
by Josh
SO I am in a little bit of a debacle. Anyone know what type of finish wiper arms were originally? I need to repaint mine as they are basically metal in color, and was unsure weather to go with a mat, satin, or gloss black finish, I have even thought about plastidip.
Any thoughts on it? I think I am leaning more towards the satin but thought I would ask for some input.
Thanks!
Re: Wiper arm color/finish
Posted: February 7th, 2012, 7:11 pm
by SuperK
I think it was a matte black. mine is kinda weathered looking but you can tell they weren't glossy.
Re: Wiper arm color/finish
Posted: February 7th, 2012, 7:13 pm
by mitmaks
You can't have reflective items on/around your dash so they weren't glossy. Plastidip would would perfect too.
Re: Wiper arm color/finish
Posted: February 7th, 2012, 7:16 pm
by SuperK
my dash should be illegal. have you seen how shiny these things get after you clean them?
Re: Wiper arm color/finish
Posted: February 7th, 2012, 8:12 pm
by Daninski
I re-spray my wipers with Matt Black and it looks real mice, just like factory. I found scuffing them with scotch brite first works well to ensure good adhesion. The cloth follows the contours of the wipers well with no sandpaper scratch lines.
Re: Wiper arm color/finish
Posted: February 7th, 2012, 10:05 pm
by MrMazda92
Dan's dead on about scotchbrite prep, and I personally used a matte black for mine as well. Since mine were only faded on the top, I used the bottom portion to color match. It's not too tough, black is black, and you should respray the entire thing anyways.

Re: Wiper arm color/finish
Posted: February 8th, 2012, 10:48 pm
by Nd4SpdSe
SuperK wrote:my dash should be illegal. have you seen how shiny these things get after you clean them?
OMG i used to curse at mine! lol
Re: Wiper arm color/finish
Posted: February 8th, 2012, 11:28 pm
by Sisko182
I think I used a gloss clear coat when I painted mine this past summer. You can see a couple of pictures on my worklog.
Re: Wiper arm color/finish
Posted: February 9th, 2012, 4:56 pm
by Josh
Thanks for the suggestions guys. I think I may go with the satin finish. I have a nice size can. I think I am going to get some black plastidip to do the trim rings around the rear wiper.
It the plastidip turns out ok I may just do the wiper cowl as well...
Re: Wiper arm color/finish
Posted: February 9th, 2012, 5:00 pm
by SuperK
Nd4SpdSe wrote:SuperK wrote:my dash should be illegal. have you seen how shiny these things get after you clean them?
OMG i used to curse at mine! lol
The double whammy is, you can't help but clean it! Once you're done detailing, you're like, "damn that looks so good!" (In the garage)
Then, driving it around, your next response is just, "DAMN you vile dashboard!"
(must use Stewie voice)
Re: Wiper arm color/finish
Posted: February 12th, 2012, 12:05 am
by Nd4SpdSe
SuperK wrote:Nd4SpdSe wrote:SuperK wrote:my dash should be illegal. have you seen how shiny these things get after you clean them?
OMG i used to curse at mine! lol
The double whammy is, you can't help but clean it! Once you're done detailing, you're like, "damn that looks so good!" (In the garage)
Then, driving it around, your next response is just, "DAMN you vile dashboard!"
(must use Stewie voice)

Re: Wiper arm color/finish
Posted: February 12th, 2012, 1:58 am
by Sisko182
Time well spent..
Re: Wiper arm color/finish
Posted: February 13th, 2012, 12:15 am
by ethand
Lol!!
I personally used gloss black, with gloss clearcoat, looks sweet as, and I havent had any problems with reflections, and I basically live in the sunniest part of the world...