Page 1 of 2

Scariestwalnut's Worklog

Posted: May 16th, 2011, 11:04 am
by Scariestwalnut
Hi everyone! Most of you guys don't know me at all. Some of the people that are on the Mx-3qc forums do know me. So I'll introduce myself! My name is Marc, I live in Châteauguay, Qc, Canada. I'm 18 years old, have had my drivers license for almost 2 years now. I'm currently at my 8th car (4 of them being mx-3s :lol: )

My loving for the car industry started a couple years back, when I was only 8-9 years old. My brother bought a 1989 nissan Skyline. His being the 3rd in Canada (or so). I fell in love with cars. Of course, I wasn't old enough to understand all the engeneering that was put in place, right there, in front of me, but I did understand atleast ONE thing, I wanted a car as powerfull as his. For me, at that moment, 400bhp and 350rwhp was the most epicness! Of course, I do realize that there are WAY more powerfull cars on the streets, but to me, this IS the monster. Then, about 2-3 years after my brother got his skyline, my dad got one too. I was in paradise. It was far more less powerfull than my brother's, but still, RHD cars are awsome! I worked a little with them, even tho I couldn't understand everything I was doing (wich is kinda normal at 10 -11). But I learned, every little things that I could from them, and I still learn today.


But, lets get back to the main subject, Mx-3s :P
My journey started in late October 2010. My 1997, AWD, Subaru Brighton was getting pretty fucked up by rust and needed serious investment, wich I couldn't afford. So I had to make the terrible decision to sell it. I then started looking for a new ride. I had seen Mx-3s on the streets, my neighbour once had one, but for some reason, I never really got into it. Then, I saw it, a 1996 automatic 1.6L Mx-3. I fell in love! It neede some bodywork due to some rust, but I was up for the challenge! I changed some basic things, like a cracked headlight, rusted doors and a hatch. I loved it, but the lack of power and acceleration made me sell it. I looked up, and found a MX-3 KL-DE with shortshift, stage 3 clutch, HID, and some other goodies. I bought it for peanuts and played alot with it. It was a HUGE upgrade, going from a automatic 1.6 to a manual 2.5! I was astonished. I loved the engine so much, until it started to f--- up... A bad ground (wich I only discovered when it was in pieces). So I bought another one :D This one being the perfect base for a swap/ mods. 2k later, It was MINE :twisted: :P! For now, I lowered it, added a race stearing wheel and that's about it, but the 2.5L KL-DE is going to be back!

First Mx-3 1996 1.6:
Image

Image

Here, you can see the Quick painted door I had to do because the guy wanted it That same day!
Image



Now, My 1993 KL-DE:
Image

Image

Image

And my 1994 K8 1.8:
Image

Image

Image

Re: Scariestwalnut's Worklog

Posted: May 16th, 2011, 5:18 pm
by johnmx3ze
Welcome to the forum mr. "la noix"...

you'll find a bunch of good info on here, with people that know their stuff!

glad you registered, now let the mods begin!!!

keep up the pics!


ps. i saw if car and its one clean mx-3!

Re: Scariestwalnut's Worklog

Posted: May 16th, 2011, 5:32 pm
by Scariestwalnut
Haha, Thx bud, and yah, I did take a little look around and GOSH! This is a GOLD MINE! :D

Re: Scariestwalnut's Worklog

Posted: May 16th, 2011, 8:15 pm
by AaronTietje
Welcome. That is one nice red mx3. :D

Re: Scariestwalnut's Worklog

Posted: May 16th, 2011, 8:46 pm
by Scariestwalnut
Thank you very much! And yes, IT'S MY BAABYYYY :D :lol:

Re: Scariestwalnut's Worklog

Posted: May 16th, 2011, 11:32 pm
by racycle
I'm loving that steering wheel. :D

Re: Scariestwalnut's Worklog

Posted: May 16th, 2011, 11:38 pm
by Scariestwalnut
Hehe :P

Re: Scariestwalnut's Worklog

Posted: May 17th, 2011, 12:14 am
by Evo_Spec
i was going to ask you what rims those were but looking closer i realized those are the stock rims! right?
if so i really like what you did with those, kinda makes it look like the MS rims

Re: Scariestwalnut's Worklog

Posted: May 17th, 2011, 1:08 am
by Scariestwalnut
Yes indeed, they are the stock V6 rims. I have bought them like that (actually, they came with the car). But what the previous owner told me that he polished the mags, then, painted black the side of the rims, finnaly aplied a couple coats of clear. I think that's about it :)

Re: Scariestwalnut's Worklog

Posted: May 19th, 2011, 5:12 am
by Scariestwalnut
Update!

Alternator needed to be changed, so I did, 30mins later, it was running perfectly :D

Also got my stage 1 KL-DE clutch kit. Brand new (from 2 years aog xD)

Re: Scariestwalnut's Worklog

Posted: May 19th, 2011, 7:14 am
by johnmx3ze
is it blue? if so i sold it to kab about 1year ago!

Re: Scariestwalnut's Worklog

Posted: May 19th, 2011, 2:19 pm
by Scariestwalnut
yeah, it is :P

Re: Scariestwalnut's Worklog

Posted: May 21st, 2011, 5:37 pm
by Scariestwalnut
Finnaly! I got a job :lol: Was about time! I will now (that being within a week or two) buy Johnmx3ze KL-DE, and alot of goodies!

Re: Scariestwalnut's Worklog

Posted: May 21st, 2011, 8:44 pm
by racycle
congrats man , that means we dont have to wait as long for updates >:]

Re: Scariestwalnut's Worklog

Posted: May 21st, 2011, 9:23 pm
by Mooneggs
wow super low miles... I like that look on the oem wheels as well!