MX-3.com

Alright, so, August 2009 I picked up a completely stock, never been touched, 1992 MX3 GS. I drove it for a while and then came across this site, which naturally opened my eyes to the world of mods . I have my "to do list" below of the projects to be tackled, stay tuned for more!

To Do:

- Short throw shifter
- Fog lights
- Eunos rim centre caps
- Eunos "bonnet" badge
- reverse glow gauge dials
- Euro mini side skirts
- rear mudguards
- Repaint black with offset blue stripe(s) [possibly]
- Paint or powder coat valve covers and Intake mani blue
- Turbo ???????

Done:

- Custom built cold air intake [from --> rece]
- KLZE engine swap [from --> rece]
- KL36 ECU [from --> johnmx3ze]
- ottoR racing seats [from --> RS_OBD'oh_2]
- momo shift knob [from --> RS_OBD'oh_2]
- rear seats reupholstered
- driver’s side mirror
- Rubber seal on doors
- MS oil cap [from --> RS_OBD'oh_2]
- New pedals [from --> fleabay]
- Custom trunk floor [idea --> mikeinaus] [re-doing with half-inch plywood]
- A/C button...just the button [from --> Mooneggs]
- New shift knob [from --> fleabay]
- New water pump
- New timing belt [installed --> Mi|<e]
- black OEM interior panels
- "Momo" black and blue leather shifter knob
- Front OEM GS bumper
- Rear OEM GS bumper
- OEM GS Front splitter
- re-colour door panels blue
- paint dash bits blue
- paint roof interior and pillars
- "Eunos" trunk cover [Idea --> Nd4SpdSe]
- LED dome light
- LED trunk light
- Projector headlamps
- Altezza tail lamps
- Lowering springs

i was like, YES, he made a worklog, i can see his car now!
only to have no pictures yet =/

so you going for a more OEM look like most of us? or whats your plan on appearence.

Jesse swapped in a ZE for you?

haha i loled out loud...once i get her home from Jesse's today, "god willing" as stated previously, Ill take some piccies for all you pic whores out there
BTW, im definately going in the clean, original MX3 direction for this one.

why you need a front/rear bumperif your going OEM? current one cracked or something?

both of them are destroyed haha...well not "destroyed" per se but without the numerous screws ive put in them they would both fall off lol

you can now scratch off your kl36 ecu in your to do list! hehe

looking foward to see pics

Alright, no pics of the beast yet but they ARE coming soon..possibly tomorrow pending my memory
in the meantime however I've been to pick 'n' pull and found MINT, and I repeat, MINT factory floor mats. I also found very nice rear seats and a very nice condition boot cover which will be a very fun project with many thanks to Nd4SpdSe for the inspiration. I actually took pictures of the boot cover and seat as I took them inside for my little projects. Enjoy these as much as you possibly can




Just some elbow grease and they'll be golden (or blue I mean).


Some OEM rear seats for 10 smackers and I've got the "relative" beginnings of my blue and black themed interior!

hey whores need pics of mint floor mats and everything else! Om nom nom nom
by mint you mean one's that are going to magicly wear really quick when your buddy Evo_Spec comes over to your house right?

haha yah the mint will "magically" be swept away...

anyways, been back down to Pick n Pull to further terrorize this lonely MX3 doner I've been picking and pulling apart. I got the rest of the back seat, the drivers side headlamp (bracket is broken on mine), the driver's side mirror with frame, and some very nice rubber seal for the doors! I couldn't believe the shape of the shite in this 17 yo car!! Check it:





And finally, pics of the beast...no interior shots yet, sorry!!

screw USDM headlights! get some JDM's or some glass ones or projectors

lol yah thats the plan, ill take a shot of it today but the bracket on my drivers side is replaced with some black gunk and i need to get rid of it before the new ones (HID's hopefully) go in.

you do realized i'm a complete pic wh0re and need like pictures of EVERYTHING right?

so here's my "help" on your to do list
- front bumper (want one with fogs) - keep in find you SHOULD find a euro bumper support so everything fits perfectly and your not doing a hack job, http://www.mx-3.com/phpBB3/viewtopic.php?f=17&t=71740" onclick="window.open(this.href);return false;, fog lights: viewtopic.php?f=2&t=71933&start=0" onclick="window.open(this.href);return false; Bumper: viewtopic.php?f=2&t=71297" onclick="window.open(this.href);return false; or http://www.corksport.com/j-spec-mazda-p ... inted.html" onclick="window.open(this.href);return false;
- rear bumper - what's wrong with your current one? it looks fine in that pic
- Side skirts - What side skirts you looking for? OEM? after market? (OEM full length's are very rare and mini sk's are difficult to obtain) or this: http://www.corksport.com/corksport-mazd ... kirts.html" onclick="window.open(this.href);return false;
- muffler - you mean full exhaust right?
- Front lip - if you don't find one by mid-may i got a couple i could sell
- New tail lights - Altezza's? (ebay one's)
- Paint seat rails - attention to details, i like it!
- Paint speaker covers - don't go too overboard XD but really, to each it's own
- LED dome light - i might be able to help you here, there's lots of LED stuff here in Taiwan for cheap....er, not bad price =P
- gauge cluster - gauge dials? you can get the one's i showed you on ebay, or you can get these visual orgasm's (canada, using metric speed FTW) http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWAX:IT" onclick="window.open(this.href);return false; or http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0532159983" onclick="window.open(this.href);return false;
- Air Conditioning - come on man, just drive faster with your window open (lol, it can be rough, i just man it out XD)
- New MS oil cap - real MS one's? http://img187.auctions.yahoo.co.jp/user ... y10367.jpg" onclick="window.open(this.href);return false; or http://rupewrecht.com/forsale/fs_ms_oilcapblacknew.jpg" onclick="window.open(this.href);return false; (Come in yellow, red, blue, silver and black.)
- Blue powder coated valve cover - let me know if you know good powder coaters with good prices

thanks for the info! I WILL be doing it right and going with the support like you said, I'm going for OEM side skirts, if it doesnt cost me more than my car I will be doing the full exhaust lol, I'd defo be interested in that front lip, I AM going for the altezzas but thatll most likely be one of the last things done, I'm not entirely sure about the speaker covers just yet but I'll make the final decision when I get to it haha, I would LOVE a cheap....er, a not bad price LED dome light from Tawain..ballin , I have decided on the first set of gauge dials you showed me...very nice , I already have and have thourouly cleaned and prepped an AC condenser so I'll have to see where to go with that one, and I have located one of those rare MS caps.

phew, that was a mouth full (no pun intended)

alright, satisfy your cravings all you pic whores:

Cancerous and broken areas:








Interior piccies...this is now, not when i got her:

Wow those pads match awesome!