Page 1 of 1
[WTB] Crank Pulley 1.8 v6
Posted: May 14th, 2009, 7:43 pm
by tmac4t4
aftermarket or stock, PM me if you have one.
mines split in half somehow and im not sure how its even on the car and working still
Re: [WTB] Crank Pulley 1.8 v6
Posted: May 14th, 2009, 8:07 pm
by Mad Cow
I have one in my garage, $30.
Re: [WTB] Crank Pulley 1.8 v6
Posted: May 27th, 2009, 10:12 pm
by Swaid
mines just split tooo...are the underdrive pulleys direct replacement? I read that you have to modify the oil pan...
Re: [WTB] Crank Pulley 1.8 v6
Posted: May 28th, 2009, 5:33 am
by marcdh
UDPs require dremeling away some metal around the oil pump shroud and the timing belt cover.
Here's how:
http://uk-mx3.com/forum/viewtopic.php?t=1128
You will also need new belts.
Re: [WTB] Crank Pulley 1.8 v6
Posted: May 28th, 2009, 6:14 am
by muttpower
Personally, I'd just go with an UnderDrive Pulley. They're not too hard to install but worth it.
Re: [WTB] Crank Pulley 1.8 v6
Posted: May 30th, 2009, 3:07 pm
by ramsen25
I have a brand new under drive pulley with the belts for the 2.5 if you need
Re: [WTB] Crank Pulley 1.8 v6
Posted: May 31st, 2009, 8:12 pm
by mazda___mx3
ive got a couple crank pullies laying around i have 2 parts cars that are semi complete if you need one or anyother parts
Re: [WTB] Crank Pulley 1.8 v6
Posted: June 7th, 2009, 9:50 pm
by tmac4t4
purchased a lightweight one for 50 bucks,,thanks for the replies.
