MX-3.com

... without rubbing?

I'm gonna get a set of rims with a -27 offset so they'll stick out, with some BF Goodridge drag radials... eitherwise I'm stick using the 205/50R15's, but I want more rubber to the ground.

stereoking15 runs 225, and autocrosses.

215/40/16 is what im using on my mx-323 mashup, bridgestone potenza's on Drag DR-20's black
perfect fit & total diamater difference is .036" from oem ... and holy fak does she stick

I run 225/50/15s on my tokico/dropzone setup. It's about as large as you can fit before you have to use spacers and/or very low offset rims. Here's some pics. I forget the offset of my rims, either 40, 38, or 35. I got them in a 6.5" wide rim to accommodate for the offset and move the physical centerline out to avoid rubbing the struts. They're microscopically close, but they don't rub.

a 30mm lowered GS, does rubb with 215/45 R17 and 3 persons on board

I wanna see pics when that's done. Should be a pretty crazy looking setup. My 13x8s for slicks stick out and they're only at a +4 offset.

I was wrong. Stereoking15 has 235 width. That's phat!