Page 1 of 1

[WTB] MX-3 center console, driver's window switchs, seatbelt

Posted: October 4th, 2007, 12:19 pm
by nonamekid
I just bought a 1992 MX-3 GS that needs some parts. Right now I am looking for the center console where you rest your arm with the flip up lid and all that is involved in that. The lid is gone on mine and there is just the bottom half.

I also need the drivers side power window switches. One of the switches is gone with a screw driver down the hole to knock the pins back and forth to get the window to get up and down. So if I could get a complete insert for the door so all I have to do is unplug mine and plug the other one in, that would be perfect.

I also need the complete automatic seatbelt for the drivers door. The sliding latch is stuck in the middle with the cable hanging out in the back, and it just needs to all be replaced. I think the motor burned up to, so if I get the whole assembly that bolts in there that would be great.

Anyway, thanks for the great site guys.

Posted: October 4th, 2007, 12:36 pm
by Mooneggs
the seatbelt should be under warranty at mazda since there was a recall. Do you have a Mazda dealer near you?

http://www.mx-3.com/recalls/seatbelts.cfm

Posted: October 4th, 2007, 12:42 pm
by nonamekid
Thanks, did not know about that. The nearest mazda dealer is 70 miles away, but I think we can use the excuse to go shopping or take the wife out to dinner.

Posted: October 4th, 2007, 2:21 pm
by Mooneggs
be prepared for them to not want to do the work... some quick calls to mazda corporate can change their minds though. And plus it's on your driver's side - that's a serious safety issue for you!!

http://www.mx-3.com/phpbb2/viewtopic.php?t=60582

Posted: October 4th, 2007, 3:10 pm
by Tunes67
I have a spare center console for the MX-3. Its the stock style for the 92-93 year with just the single lid not the double decker style. Its in pretty decent condition overall. $30 + shipping sound fair? PM me a zip code and I will check on shipping to you tomorrow.

Tunes67

Posted: October 6th, 2007, 12:17 pm
by DimaK
glad to help you out with the switch