MX-3.com

My car was parked back in november just pulled it out month ago. I was gonna strip it and part it out but then got offered for the whole thing and was fixing it. Motor swapped a KLDE into it. I can't remember if the tach worked before but right now it doesnt move. The harness in the back is plugged in. Wondering if there is a common problem for this. Where to check maybe a splice in the wire came undone. Lemme know.
Thanks guys.

did a little searching after posting and found that I need to splice into the middle wire on the 3wire harness. Gonna see if i can find it. I also have the HEI mod so not sure if its gonna work or not. I havnt really looked at this problem much.

when you splice in make sure you place the resistor in the new wire. If you have already done the HEI mode with coil, and did'nt do this, your tac might be fried.

twoie