Page 1 of 1
Will these injectors fit...?
Posted: March 20th, 2007, 3:15 pm
by Nomad_69er
I was just wondering if anyone knew if these would be a direct swap into a 95 MX3 RS (1.6L DOHC)?
Thanks!
http://cgi.ebay.ca/Mazda-Ford-Fuel-Inje ... dZViewItem
Posted: March 20th, 2007, 4:25 pm
by xtreme velocity
i almost bidded on those..but i wasnt for sure either...
but if they do fit..they are all yours..
Posted: March 20th, 2007, 10:42 pm
by Limegreen mx-3
with out any tpye of fuel mangement ur stock setup won't control these injecters. ur injecters are around 190cc where the turbo probe/mx'6 are around 330cc. u'll run super rich and ur ecu will not control them.
Posted: March 21st, 2007, 4:13 am
by xtreme velocity
thats what my dad said but he wasnt sure on the cc's
glad i didnt bid..
Posted: March 21st, 2007, 7:43 am
by osargeant
Limegreen is correct, the biggest injector you can use on a 1.6 DOHC MX3 with the stock ecu alone is the 230cc injectors found in the 1.8 Miata or Protege. Anything larger and you will need a fuel controller (SAFC, Emanage etc) or standalone computer.
I am speaking from experience.
Posted: March 21st, 2007, 11:18 am
by Nomad_69er
I am running a SAFC 2 but am switching it out for a MegaSquirt standalone. So these will fit without any modifications?
Thanks.
Posted: March 21st, 2007, 7:27 pm
by MechaManZero
Since our injector pokes in the head a little doesn't that effect what type of injectors go in the B6DE. Because if I remember correctly when I had that motor, the injectors poked in the head.
Posted: March 22nd, 2007, 2:33 am
by OROutdoors
So, they won't fit in a 1.6 B6, what about a 1.8 BP, will they fit in there?
Posted: March 24th, 2007, 6:54 pm
by Nomad_69er
So is that a guarantee that they won't fit? Anyone know from first hand experience?
Thanks!
Posted: March 30th, 2007, 11:44 pm
by lv2xlr8
just curious, what kinda gain would the dohc see with the 230cc injectors? or would it be pointless without other mods?