Page 1 of 2
Finally pics of my mx3
Posted: September 24th, 2006, 11:19 am
by mbguy
Hey guys i know you have seen me post on here and wondered what my mx3 looked like well i finally got pics this weekend. here it is. let me know what you think and sign my guestbook.
http://www.cardomain.com/ride/2464926
Posted: September 24th, 2006, 12:31 pm
by solo_ryder
Prrety cool, I do not like the wing or rear bumper though! I was always wondering what those OTTO guages looked like, they are aight. I like your rims to and your tails. Good job.
Posted: September 24th, 2006, 8:16 pm
by Bling Bling
Looks cool. That spoiler must be quite heavy ( almost looks as though the back of your car is lower than the front). Overall not bad.
Posted: September 24th, 2006, 8:29 pm
by lakersfan1
solo_ryder wrote:Prrety cool, I do not like the wing or rear bumper though!
I don't personally like any of it, but whatever floats his boat. Regardless, it looks like you've got some fitment issues on the driver's side. Looks like the hood is sitting too high over the driver headlight, and the bumper fascia is sagging too low below that headlight also.
Posted: September 24th, 2006, 11:09 pm
by Vanished
maybe his headlight shrank
hah..
no man looks good. I like the rims what kinda are they?
Posted: September 25th, 2006, 3:23 am
by illapino
WASN'T I JUST ASKING THIS?
"CAN I PUT A CIVIC BODYKIT ON A PRECIDIA" ??????
Posted: September 25th, 2006, 10:57 pm
by GregoryChristian
nice wheels ....
for the civic customizing ,but not a fan of the rear bumper ...it needs a lip
Posted: September 26th, 2006, 12:51 am
by Vanished
illapino wrote:WASN'T I JUST ASKING THIS?
"CAN I PUT A CIVIC BODYKIT ON A PRECIDIA" ??????
k don't get your panties in knot. You can put an RSX body kit on our cars, a prelude kit, a cavlier kit. Any kit can fit with customizing, as long as you know what your doing.
Posted: September 26th, 2006, 1:38 am
by illapino
yup.
saw the rsx conversion in progress at cardomain.
waiting for final result.
but what you've done here seems seemless.
the front bumper you say is from a civic, yet the uppermost grill (if you know what i mean) seems so identical to our car, you know, the slit between the headlights ...
the point of doing a front-end conversion to a civic bodykit would allow halo projectors to also blend in well, this was my main point. and i mean. just by looking at it, if that is a civic bodykit on there, made for a civic, then it shows that the form of the mx-3 is very close to the civic which was my main inquiry neway.. man im drunk
Posted: September 26th, 2006, 6:33 pm
by Hoodzy
ummm.... dont like any of it
rims are decent thats about it
Posted: September 27th, 2006, 12:55 am
by Juans_93_MX3
Cant view pics cause CarDomain is down
Anyway, converting our front ends to look like other cars ='s NOT COOL
ok
Posted: September 27th, 2006, 1:13 pm
by mbguy
i got different side skirts to go on there now. they r 2 door instead of 4 door sides, and i am lookin into getting a different back bumper. im definately stayin with the front and rims though. ill have pics up as soon as possible.
Posted: September 29th, 2006, 10:16 am
by mbguy
civic front molded to my factory front right where it curves down. and the new sides r on. im lookin for a new back as we speak. have pics up asap. i think the wing is awesome will look better with the new back though. and most of my interior is being fiberglassed as we speak.
Posted: September 29th, 2006, 6:07 pm
by illapino
please provide a link to the civic front bumper you bought
i wanna compare how it is before and after your mx-3 conversion
heres the front i used
Posted: October 20th, 2006, 12:56 am
by mbguy
http://www.extremedimensions.com/shopdi ... ic%2092-95
here is the hood i will be molding into my stock one. should be done this weekend. i have my new 18's and my new sideskirts on but im waiting on my new back to come in. should be here next week. pics will be up as soon as possible. oh and my interior is red and black now to.