MX-3.com

i badly require this style of steering wheel
but what will happen to my cruise control buttons?

Relocate them, you have 2 choices, relocate the stock controls. That's what I did:



Or make your own. All you need is 2 momentary push-button switches, You can mount them anywhere on the car/dash Even if you want to get a racing wheel with buttons, or drill holes and/or mount them on the steering wheel (aka, Fast And Furious NOS style)

Here's J-Beef's switches, their on the wheel hub cover, but you cna put them anywhere in the car.
(info: http://www.mx-3.com/phpbb2/viewtopic.ph ... &&start=15



We can definitely help you out on that, and it's doable. You have several options, you just need to decided what to do.

jschrauwen wrote: Must find a way to loose that J-Beef handle.

Have a name that one can easilyl remember how to spell.

Have a name that one can easilyl remember how to spell

And you know.. Johnbeef seems like it would be an awkward name at times..

Tunes67

i hate that stupid horn logo... is it that hard to find the damn horn!

thanks Nd4SpdSe. i will relocate the stock cruise control switches then. they're different though, in that they are tabs, so i'll keep looking for a good spot. a larger and rectangular insert i guess.

i was planning also to get a red/red carbon fiber hood, and too bad none come with winshield-washer nozzles. that results in drilling eh?

and one more thing: there is a "blank button" (that doesn't push in) near the cigarette lighter in the center console. it has a step to it. i guess mine was optioned out so it has that filler. what button is supposed to go there?

illapino wrote: there is a "blank button" (that doesn't push in) near the cigarette lighter in the center console. it has a step to it. i guess mine was optioned out so it has that filler. what button is supposed to go there?

There's one there and one the same beside the power mirror switch. I'm not sure which spot the factory recommended to place the fog light switch at though (for the 92/93's).

For the front fog lights, it was on the dash by the mirror control and dash dimmer. The blank by the cigarette lighter is for the rear fog light

Nd4SpdSe, totally pimp mod! looks like it rolled outta the factory like that *thumbs up*

Bling Bling wrote:Just thought I would bump this as I'm going to convert my wheel over as well. From other posts, I guess I need a 6 hole hub but not sure specifically which one to get. Help would be appreciated!!

Well, I dont think there are many 6-bolt hubs. Most 6-bolt wheels use momo hubs, they're typically advertised as using the momo pattern. Unless specified, it *should* be safe to assume it;s compatible with a momo hub

ninjajim4 wrote:Nd4SpdSe, totally pimp mod! looks like it rolled outta the factory like that *thumbs up*

Thx

Other than MOMO there are another 6 bolt hub out there with a different pitch circle diameter. I believe the Mazda/ Nardi PCD is larger. I remember a local shop had someone bring in a wheel to install. It didn't work. I have a turntable with a divider wheel on my drill press so I took the hub and redrilled and tapped new holes half way between the existing holes at the correct PCD.

For anyone interested here's a shot of my wheel. (sorry about the res. It was a high res shot in it's day almost 10 years ago)