Page 1 of 1

Mazdamx3sohc - 1993 mx3 rs

Posted: April 30th, 2006, 2:36 pm
by mazdamx3sohc
i bought my 93 sohc around fall of 05, $1500 for it, 93,000 miles on it, no dents scratches or rust at all except the paint fade on the roof, new clutch, new axles, new brakes.


i started doing small things a few months back so far in order: (pictures will be added very soon i just wanted to get this started.)

1. gs spoiler.
2. cold air intake, titanium muffler w/ silencer.
3. Vibrant front upper strut tower brace.
4. Pacesetter Short throw shifter.
5. Auto vent shade rain guards.
6. Painted valve cover and interior stock tropical blue.

Posted: June 9th, 2006, 8:46 pm
by mazdamx3sohc
My first mod to the ol' mx, pacesetter short throw shifter.
Image

My second mod is the vibrant upper strut tower brace.
Image

My third and fourth mods are the cold air intake and painting the vc factorys color, also the inside ac grills (below).
Image

Image

My new altezzas courtesy of alex of southwest FL.
Image

Again thank you alex, with the revers glows.
Image

AC vents
Image

Rainguards and mx3 logo on dash.(like at least 10 hp's)
Image

Image

New plugs, wires, foam filter, and steering wheel and hub.
Image

Image

Image

Image

Also as shown above i painted the tan crappy color pillars front to back.

Posted: June 10th, 2006, 3:03 pm
by 4gotn
nice progress
my next big project will be getting my full exhaust on
headers
straight pipe all the way
cut out right after header
dual exhaust
mmmm...cutout....<3

Posted: June 10th, 2006, 10:20 pm
by mazdamx3sohc
Not getting the bp motor, thinking of doing up my sohc.

Posted: June 28th, 2006, 6:55 pm
by mazdamx3sohc
well i took off my reverse glows and tail lights. i like the original better.

I also just today got some mothers aluminum and mag polish for my headlights courtesy of alex (kudkudniyog) you can check out that progress at: http://www.mx-3.com/phpbb2/viewtopic.php?t=52684

Posted: July 3rd, 2006, 9:20 pm
by mazdamx3sohc
Today (7/3/06) my car died, the lights work and all, the alternator is perfect, it just wont turn over, im thinking its the starter. so now i have to see what im gunna do about that.

Posted: July 3rd, 2006, 9:56 pm
by Bochek
mazdamx3sohc wrote: the starter is perfect, it just wont turn over, im thinking its the starter.

holly contradicting statement batman.

Posted: July 3rd, 2006, 9:58 pm
by mazdamx3sohc
i meant the alternator is perfect the starter must be gone, why must you harass me?

Posted: July 27th, 2006, 3:11 pm
by mazdamx3sohc
just had the cat and resonator cut off and replaced with straight pipe cuz it roted away http://www.cardomain.com/ride/2223686/1 check it out.

Posted: July 28th, 2006, 8:50 pm
by MechaManZero
LOL yeah yeah the whole rotted away excuse lol jk. I would take that thing out too. It's useless in my opinion. The world isn't going to be around for ever lmao.

Posted: July 28th, 2006, 8:58 pm
by mazdamx3sohc
lol, plus without the cat and resonator i may be able to pop a couple of small fireballs.

Posted: January 14th, 2007, 5:18 pm
by mazdamx3sohc
UPDATE: i dont have any dates but in order, i just put a nice resonator back on it, most of the pipe from like the shifter area back is all 2 or 2-1/4 inch, still no cat

Just installed a new perfektion clutch from advance auto
bought a radar detector
new pioneer speakers in the back


when i get back to new hampshire i am most deffientely doing the bp swap but im having it done cuz im not gunna have a place to do my own work at or the power tools. plus i know a guy that will do it for cheap.

Posted: July 23rd, 2007, 7:28 pm
by mazdamx3sohc
update again july 23. 07

i just bought a new hood and headlights and this is what it looks like:
Image

Image


i ordered a LeBra cover. and also some dropzone lowering springs that are going to lower it 1.8 inches front and back...picture for that will be up later this week i hope.