Page 1 of 1

K8 nitrous

Posted: March 21st, 2006, 7:34 pm
by nathanMx-3
what is the best nitrous kit/ shot to use on a K8 with aftermarket pistons , jet chip, HKS cam shafts (with stock fuel pump ,willing to switch) :?: :shock:

Posted: March 23rd, 2006, 9:36 am
by Macpherson MX-3
I know someone running a 50 shot, on stock engine and fuel pump, I recomend ZEX, they work well with stock engines. Whas that jet chip like on the K8?

Posted: March 23rd, 2006, 9:54 am
by Custommx3
HKS camshafts... HKS doesnt make cams for our cars.

Posted: March 23rd, 2006, 10:13 am
by nathanMx-3
The guy i bouhgt the car from told me that he had coustom cam shafts put in that he got from HKS.

Posted: March 23rd, 2006, 10:39 am
by Custommx3
He lied.

Next time you take off your valve cover, take a picture and read the numbers on the cams. Probably k801.

Posted: March 23rd, 2006, 12:24 pm
by Macpherson MX-3
I have been looking to find out if they do make cams for the mx3 did not find anything I thing he may have put in new cams in it but not HKS

Posted: March 23rd, 2006, 12:56 pm
by Custommx3
HKS doesnt even make a cam that would fit in a K series Block.

MAYBE he used KLZE cams, KL cams, or KF cams.

Posted: March 23rd, 2006, 1:07 pm
by nathanMx-3
my friend and i, pulled the valve cover off and he told me that theydefinately arent HKS cams, but they are not stock,, anyway how much nitrous can the K8 handle :evil:

Posted: March 23rd, 2006, 3:32 pm
by Custommx3
Depends..

If your looking @ longevity.. not much.