rear spolier
Posted: March 4th, 2006, 4:07 pm
I know this is probably a stupid question but how do I remove the spoiler on the v6 stock
Page 1 of 1
Posted: March 4th, 2006, 5:10 pm
you need to take off the plastic panels on the hatch and it will reveal 4 bolts from the underside, just unbolt them and it'll come off.
Posted: March 5th, 2006, 12:29 pm
Ahem, 6 nuts to remove from permenant studs.Nd4SpdSe wrote:you need to take off the plastic panels on the hatch and it will reveal 4 bolts from the underside, just unbolt them and it'll come off.
Posted: March 6th, 2006, 12:07 pm
ohhhhhhhhhhh
PWNED!!
jk..
PWNED!!
jk..
Posted: March 18th, 2006, 1:14 pm
Will a GS spoiler bolt right on to an RS body?
Posted: March 18th, 2006, 2:16 pm
yup. Direct fit by replacing the RS smooth hatch garnish with any of the GS spoilers.markbrad wrote:Will a GS spoiler bolt right on to an RS body?
Posted: March 18th, 2006, 2:36 pm
the question no one has asked, which GS spoiler are you wanting to remove? Also, with the GS spoiler, there are two additiondal screws under small round covers close to the front of the spoiler.
1.
2.
3.
If a 94 GS spoiler is going to be put on, then some drilling will be required.
1.
2.
3.
If a 94 GS spoiler is going to be put on, then some drilling will be required.