Page 1 of 1
A few B6 DOHC Questions
Posted: February 20th, 2006, 5:00 pm
by kaioken
What is the Combustion Chamber CC's? & What is the Deck Height? Also what is the size of the injectors?
Im looking for the stock size.
Posted: February 20th, 2006, 5:19 pm
by Tunes67
CC is 1600 or 1.6L, I dont know the deck height off hand.. but it would be in the online shop manual located just off the main home page of
http://www.mx-3.com. Injector volumes are 49-64cc flow /15 sec according to the shop manual. Hope this helps.
Tunes67
Posted: February 20th, 2006, 5:35 pm
by kaioken
I guess I should have been a little clearer on that first question. I need the Combustion Chamber CC's of the head not the displacement.
Posted: February 20th, 2006, 5:46 pm
by kaioken
I found the Deck height. Its 221.5mm {8.720 in.}
Posted: February 20th, 2006, 5:55 pm
by Tunes67
Sorry about that. It should be in the shop manual though. If you cant find it in there.. post back and I will get my machinist to look it up for you. Cheers
Tunes67
Posted: February 20th, 2006, 6:35 pm
by kaioken
I have not found anything on the Combustion Chamber CC's yet.
Posted: February 20th, 2006, 6:37 pm
by Tunes67
Alright.. I will have my machinist look it up, in the next day or two I should have the info for you if someone doesnt beat me to it. Cheers
Tunes67