Page 1 of 1
HOLD light blinking, AIRBAG light blinking. What next?
Posted: December 1st, 2005, 11:21 am
by mxprecidia
Ok so I have adjusted to deal with the hold light since the auto to manual swap. But now that I installed a new steering wheel the airbag light is annoying me. Any way to fix this without just taking the bulb out? Thanks.
Posted: December 1st, 2005, 6:34 pm
by Typhoonk
might be dangerous -and it's illegal in the first place to remove a safety decive from a vehicle anyway (but it's just an off road car right?)
find out what the resistance is for the airbag, and put that amount of resistors in the plug and the ecu will think there is an airbag there.
Posted: December 1st, 2005, 10:26 pm
by Josh
or you can do what i did on my ATX to MTX swap. i took both bulbs out. so i take it your still running the ATX ECU and harness?
Posted: December 1st, 2005, 10:44 pm
by Focal
can some one please post the link to the online manual
Posted: December 2nd, 2005, 1:05 am
by atlantamx3
Posted: December 2nd, 2005, 1:30 am
by Focal
hahaha thanks alot atlanta
Posted: December 2nd, 2005, 3:23 am
by azazel95
Posted: December 11th, 2005, 9:13 pm
by reaper of souls
don't worry remove the air bag you don't need it as long as you don't plan on selling it your ok cops can't say s--- but it needed to pass saftey i ripped out the two on my old escort you just have to put a peice of tape over the air bag light because it will keep on blinking
I love SA's 