Page 1 of 1
o2 threads
Posted: August 26th, 2005, 3:20 pm
by fieromx3
do all o2 sensors have the same threads on them or no? if i were to replace my sensors with unversal types would it be a direct fit into my manifold? and also would the unversals work just as good as the oem?
Posted: August 26th, 2005, 3:27 pm
by PATDIESEL
Universal 4 wire will work, but you need to do a search to find out the wiring of them. They don't just plug right up. The universal ones don't have connectors so you'll have to cut the connectors off your stock ones and wire the new O2 snesor to the OEM connector.
Posted: August 26th, 2005, 3:30 pm
by fieromx3
yea i know the wiring thing but it will screw right in my stock exhaust manifold?
Posted: August 26th, 2005, 3:52 pm
by Jettblackcat
YES, almost all cars (except toyota) use a standard 18mm x 1.5 thread, the other size is 12mm x 1.25, but I have yet to see a car that uses that.
Posted: August 26th, 2005, 4:14 pm
by fieromx3
thats awsome thx