Page 1 of 1
power windows
Posted: June 17th, 2005, 10:56 pm
by GregoryChristian
how hard is it to convert from manual to power windows ? I know I need the motor and switch ...anything else ? does the manual door have pre drilled holes for a easy install ?
Posted: June 17th, 2005, 11:37 pm
by Tunes67
If you convert your manual door panel.. you will have a big hole left in it where the crank handle currently resides. You could always fill it with a tweeter or cover it with a Fast n Furious sticker
J/k ok.. that WAS a joke
LOL
Tunes67
Posted: June 19th, 2005, 11:24 am
by 2fazed
Easiest way to do the swap. Get the motors/switches/door panels/wire harness from the hinge to the door lock from a GS. Getting all of these will make it bolt-on, with no modifications.
Posted: June 19th, 2005, 7:15 pm
by exdream_mx3
Thanks 2 fazed i was also looking into doing that but didn't know what all i needed.
Posted: June 19th, 2005, 10:38 pm
by kaze
so i take it a trip to the wreckers is all that is needed?