Page 1 of 1
Car Deck Install Question
Posted: May 10th, 2005, 7:59 am
by mpertz
I have a 1992 MX3 GS, I'm looking to change the deck. I know the car has an antitheft but im not sure if it is connected to the OEM deck or if its somthing seperate. If I remove the deck and install a new one do I need some sort of a bypass for the antitheft or do I just connect it as normal without any sort of bypass
Posted: May 10th, 2005, 11:05 am
by Chino921
just buy a wiring harnes to plug into stock connectors and splice together the deck wires to the harnes wires. nothin' to it.
P.S. harness costs about $15 U.S.
Posted: May 10th, 2005, 11:14 am
by 93SOHC
The anti-theft is built into the tape deck, so unless you wanna install it again, no worries there. I'd definately reccomend a harness, but if you can't find one(like me), theres a stereo wiring diagram in the FAQ section I believe
Posted: May 10th, 2005, 12:58 pm
by Blotto
Hehe...I got my harness for $4.60 but that was with discount from Circuit City.
Posted: May 25th, 2005, 1:28 pm
by reaper of souls
the anit theft is bull nothing happens it just to scare ppl off and make old ladys feel happy it just meen that our cars have a immoblizer in the steering coloum so if some one trys to start the car without a key the starter won't engage no worry if you have the harness and also your a bastard i had to spend $10 for mine