Page 1 of 2

December Drag Board

Posted: November 15th, 2003, 3:36 pm
by torpedan
Mx-3.com Drag Board

With Aaron new project comes the passing of a old one. Unless there is massive public objection i will resume maintenence of the top drag board with a few minor changes to try to let some people get a stake in.

These lists were compiled Using Aaron old drag boards and the responses to them. If you have a correction please send me a PM and if you have a addition please post it along with you list of modifications. Time-slips may be required. All Vehicles must be non-professional front drive Mazda designed. Times will not be posted unless they meet the above criteria

Mx-3.com Top 20 Free for All.

1. 1sickmx6 12.74@108 ze n20

2. Tim's mx-3 12.95@109.5 kl03,n2o,275whp

3. aaronthehic 13.023@105 n2o(41/29), ze,ze-ecu,adj. fuel reg., 2.5' exhaust, cat, no alt,no p.steering,plexi hatch k+n, cai, cm4, sht. shift, lwrd, slicks, no seats

4. 93mxrgs 13.23@107 klde,n2o

5. Gabi 14.29@98 ze

6. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.

7. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered

8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.

9. thebonestockkid 14.648@ 93 klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch.

10. Nd4SpdSe 14.76@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving

11. Hex3 14.8@93 ze, nitto 450

12. Lieden 14.82@98 ze, stock

13. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping

14. Vlad 15.008@92 kl03, cai, 2.25" catback, lwrd.

15. Kurtze 15.04@? ze_bonestock

16. Wkdmx3gsr 15.1@? ze, catback, nitto555

17. Nolanspawn 15.680@86.6 93 2L probe

18. Jspec 15.8@? ze-bonestock???

19. Max 15.84@87 k8, k+n, cai, catback, kvr rotors, srd frnt cross member, srd lwr tie bar.

20.Mazadamxstyle 15.92@87 k8, cai, 2.5" catback, 2350lb

Top 5 Mx-3.com V6 N/A

1. Gabi 14.29@98 ze

2. XxAntwawnxX 14.450@95 ze,probe IM, 2.5' exaust with cat, stripped.

3. smoking mx3 14.47@96 ze, ze-ecu, headers, no cat, lowered

4. thebonestockkid 14.648@ 93 klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch.

5. Nd4SpdSe 14.76@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving

Top 5 Mx-3.com I4 N/A
(Dug for a while. I saw a reference to one but couldn't find the exact time Get em posted!)

1. torpedan 15.558 @ 88.9 MPH - BPD, Gutted(2290lbs w/driver), Indigo Flywheel, UDP, 1 7/8 exhaust, Nology Wires

2. Nolanspawn 15.680@86.6 93 2L probe , Weight reduction, every bolt on money can buy.

3. xXx_OTEP_xXx 17.7@76 @ 76.? here, cone filter, 2.25" cat-back exhaust

4. Mike - 17.7892 @75.2968 mph (stock?)

5. (This spot could be yours)

<small>[ December 03, 2003, 07:29 PM: Message edited by: torpedan ]</small>

Re: December Drag Board

Posted: November 15th, 2003, 3:59 pm
by thebonestockkid
i ran 14.6 N/A with my de... why arent i in the top 5 NA? hmmm? lol jk :p

Re: December Drag Board

Posted: November 15th, 2003, 4:14 pm
by torpedan
HEhehe Gotta have the list of mods. Not stock just is throw in the top section.

Re: December Drag Board

Posted: November 15th, 2003, 8:32 pm
by thebonestockkid
what does it matter... the car IS N/A after all.. lol..

klde, apexi cai, 2.5" exhaust, highflow cat, cm stage 1, intrax springs, gutted hatch. thats it :shrug:

Re: December Drag Board

Posted: November 16th, 2003, 6:54 pm
by 1SICKMX6
I am king leader of the board!!!

LOL It is nice to finally be on top.

If anyone is intrested I have the nitrous kit and some nitrous parts for sale message me.

Later 1SICKMX6!

Re: December Drag Board

Posted: November 24th, 2003, 4:30 pm
by JWMotorsports
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile. :freak:

Re: December Drag Board

Posted: November 24th, 2003, 4:47 pm
by Marlon
Originally posted by JWMotorsports:
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile. :freak:
:2thumbsup:

Re: December Drag Board

Posted: November 25th, 2003, 1:55 am
by Nd4SpdSe
you'll need to change my cars times

Nd4SpdSe 1.476@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving

That should bump my car in to #5 of the top 5 N/A Mx3's

and theres a few 4cyl mixed in tha you didnt add to the list at the end

8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.

12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping

Re: December Drag Board

Posted: November 25th, 2003, 9:04 pm
by aaronthehic
[quote]Originally posted by JWMotorsports:
All I have to say Mr. Sick MX-6 is divide it in half, cuz my MX-3 WILL be the 2nd fastest only to Daves car come this summer (my R&D won't be finished untill tracks are long closed). Once my car is done I'm planning on taking the title as FASTEST MX-3 ever! Possibly burring it in the 9's for the 1/4 mile. :roll:

and what have u run to date sir... nothing...oh

Re: December Drag Board

Posted: November 26th, 2003, 12:40 am
by xXx_OTEP_xXx
I4 n/a .. 17.7@76 here, cone filter, 2.25" cat-back exhaust

NOW THAT IS FAST! :crying:

Re: December Drag Board

Posted: November 26th, 2003, 11:25 am
by JWMotorsports
You got a point about track times. But lets put it like this....

call Derrick @ Corksport and ask him if I'm $h*ting you guys, cuz he's sold me the last COUPLE Thousand $$$ worth of equipment that I'm installing as of this moment. As far as the fastest track time, 13.3 @76MPH in the 1/8 mile...that didn't add up did it? ;) Spun through 1st, POS wouldn't go into 2nd till I hit the brakes to slow back down. Then I spun alllll the way through 2nd, 3rd, and barked 4th on the finish line for that time. I was PISSSED about 2nd gear and didn't feel like paying $10 to run again. The 5.0 Mustang had a 1 sec head start and I STILL almost caught him!

Any way...you can ask Shady on the board, he's seen half the stuff including the new turbo :pimp:

Re: December Drag Board

Posted: November 26th, 2003, 11:42 am
by JWMotorsports
Another interesting tid bit on my car:

The engine was leaking oil at the head gasket and starting to get a little blow by at the rings :freak:

Re: December Drag Board

Posted: November 27th, 2003, 2:49 pm
by Shady469
I have seen the turbo... we put the stock one up next to it and i almost cried. i think the in/outlets are like 3x bigger. Its a freak of nature. With all the things jeremy(jwmotorsports) is doing to his car it wont have a choice but to be fast as hell.
oh, and another note about his time: at the same track (1/8th mile) i went (with old b6t set-up) 10.6 @76 with a 3.1 60 ft. There is no traction to be had.
either way, if any of you guys in VA beach or maryland want to meet up early next season at a track you can see first hand what all jeremy and i have done.
maybe we can run em... :2thumbsup:

Re: December Drag Board

Posted: November 28th, 2003, 6:19 pm
by aaronthehic
i ran a 13.728@100 na before can i double post :D

Re: December Drag Board

Posted: November 28th, 2003, 9:53 pm
by torpedan
Originally posted by Nd4SpdSe:
you'll need to change my cars times

Nd4SpdSe 1.476@91.51Mph ze, bully stg 2 clutch, 2.5" exaust, 1sickmx6 driving

That should bump my car in to #5 of the top 5 N/A Mx3's

and theres a few 4cyl mixed in tha you didnt add to the list at the end

8. Cjthor 14.62@99 b6-ze+mods, stripped, slicks, n2o.

12. 94mx3rsr 14.850@96 bp turbo, euro spec fuel mapping
those two 4cyls are not NA