MX-3.com

What are you guys getting for times? Some people say that they're in the mid 14's and others say they're in the mid 15's.....what should I be running with a KL-ZE in my 93 MX-3? Haven't had a chance to run it at the track yet cause I'm still performing some "tid-bit" mods here and there, but I have run it on a G-Tech (good comparison tool) and got a 15.1 with a terribly knocking axle.

In the 14.xx range at a real 1/4 mile track, and between 12's and 17's on Gtech. [img]shrug.gif"%20border="0[/img]

hahha nice one dave!!!!!!!

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by David Coleman:<BR><STRONG>In the 14.xx range at a real 1/4 mile track, and between 12's and 17's on Gtech. [img]shrug.gif"%20border="0[/img]</STRONG><HR></BLOCKQUOTE><P>Like I said, the G-tech is a great comparative tool.......I ran a 17.0 with the stock K8 compared to a 15.1 with the stock KL-ZE, both with similar climate conditions as well.

14.8 at st thomas <BR>I could have done better

Now is that with just a straight KL-ZE swap or is that with an intake, exhaust, underdrive pulley, engine work, etc...<P>I just need to know what I should be running with the stock KL-ZE setup. I may be wrong, but I could've sworn that there's someone on this board that ran a 14.1 with only a prm intake....

with kl-ze, headers, clutch, flywheel<BR>also with very bad suspension and shitty a-- engine mounts stock ones from 1992<BR>stock rims with eagle gps rubber

What are you running for headers?

i'm interested in what your are running for headers also.<P>i ran 14.7@92 in my 323 with a KL-03. i just have the exhaust done, and horribly heavy wheels.

If you want better times use 14 inch steel wheels with a set of slicks.<P>this will lower you 60 foot times quite a bit and lower the 1/4 mile times by about 0.2-0.3 sec.<P>also, my KL-ZE is stock(except for a el-prototypes ECU), stock air box, stock exhaust and it made 156H.P. at the wheels with the intake manifold blazing hot.<P>if you are running the stock 1.8 ecu than I would guess your H.P would be about 145-150 hot.<P>so a 15.1-15.3 1/4 mile time sounds about right.

Sean Matthews hit 14.004 @ 99.xx mph with his KLZE with intake and exhaust on BFG DR's 225/50/15<P>Tekguy hit 14.04 @ 99 with his freak KLDE with ZE power on 17's<P>One tracer guy who I believe is on this board went 13.56 @ 102 with a ZE and bolt ons, and the ever important slicks <P>A guy from the mailing list went 15.8 @ 96mph with a KLZE. Not the best driver apparently.<P>I'm shooting for 14.5 @ 95 out of the box untuned with the ZE. We'll work from there.

using brospeed headers for 2.5

2.253 60ft<BR>6.308 330ft<BR>9.628 1/8ET<BR>74.99 1/8mph<BR>14.808 1/4ET<BR>95.35 1.4MPH

I ran 14.675@92.49 the other day....my best run to date. The supra I was racing only did 14.11 and passed me way after the 1/8 mile...its was pretty sweet. I pretty sure I can 14.5...well find out next time I race

14.29: ze, intake, msd ,17" wheels ,smoking tires in first gear. St. Thomas