MX-3.com

[img]shrug.gif"%20border="0[/img] I'm doing the kl-ze swap soon to my gs and I want to throw some nitrous in when I finish. What you suggest for a brand and how many shot. I don't know too much about it. Any responses are appreciated. Thanks.

its a high compression motor, it wont take alot of boost, 4-5 PSI may be pushing it when dealing with a turbo or SC. Id be weary about spending all that money on a motor, then blowing it up w/ nitrous.

Sean has run upwards of 6psi on his KLZE turbocharged engine. Integra GSR's and ITR's have 10.6:1 CR, and run nitrous all the time, and we have better induced valve angles than the B18C head. [img]shrug.gif"%20border="0[/img]<P>I'd recommend a 50 wet shot and work from there. Talk to the guys on Probetalk.com in the nitrous forum for more information. Jeff Jeske is running a NX wet kit on a ZE around 80 shot with no troubles after a dozen or so bottles.

a guy I know that I went to the track with a couple times has a gsr and zex 50 this is a example but the guy was a little nos happy 14 of 15 runs he used nos no breaks in between runs and a couple days later tick tick tick and #2,3 have nearly no compression <BR>if you get nos use it once and a while don't cruise around town hittin the button all the time

ya a wet nitrous express system is your best bet for safety and quality....a 50 shot will be good plus you get around 100 lbs/ft of torque to go with it...cheack this out for alittel info on nitrous....http://www.importtuner.com/tech/0205it_nitrous/

dave.. jeske isnt running his ZE.. he;s running his 03 right now... unless he changed it in the last week ??? he said he was saving the ze till he screwed this motor up...

ive been using zex and have no probs at all