Page 1 of 1
Bolt-On Turbo Project How To
Posted: May 27th, 2002, 12:55 am
by mazda20
Well since there was some interest in this project I took the liberty to put a how to together for all of us. This should help answer alot of questions about this weekend project. Let me know if I missed or improperly stated something in this how to so I can fix it.<P><A HREF="
http://members.tripod.ca/~turner20/DOHC ... roject.pdf" TARGET=_blank>The Bolt-On Turbo Project Adobe Acrobat File</A>
Re: Bolt-On Turbo Project How To
Posted: May 27th, 2002, 5:30 am
by David Coleman
Impressive Project man!
Re: Bolt-On Turbo Project How To
Posted: May 27th, 2002, 7:03 pm
by marshmallow15
VERY nice write-up. your mx-3 is an rs right? how is it 115 hp? just curious. i'll use this write-up as a basis for my bolt-on turbo on my rs. good work man.
Re: Bolt-On Turbo Project How To
Posted: May 27th, 2002, 7:29 pm
by mazda20
I don't know is that a typo, what is it suppose to be base model RS 94 DOHC?
Re: Bolt-On Turbo Project How To
Posted: May 27th, 2002, 10:38 pm
by marshmallow15
iono. i thought all rs mx3s were sohc?
Re: Bolt-On Turbo Project How To
Posted: May 27th, 2002, 11:33 pm
by OsoSlo z28
92-93 were the SOHC's. 94+ were DOHC's. the DOHC had 105hp. by the way...nice write-up.
Re: Bolt-On Turbo Project How To
Posted: May 28th, 2002, 10:33 am
by mazda20
Thanks for the comments, that is a typo it should be 105 vice 115, easy fix I also noticed I forgot to mention anything about the wastegate, so I will put that in as well.