MX-3.com

I was wondering on how i could paint the interior of the dash and leather parts of the<BR>seats and the plastic on the doors.<P>Basicly everything that can be painted thanx<p>[ October 17, 2001: Message edited by: rican77 ]

I painted some of my dash and door peices...<P>i bought satin spray paint...i used about 5 cans total, and about 4 cans of clear coat. Before you spray, make you you wipe all the dirt and grease off the pieces. The easiest way to do this is with rubbing alcohol...then let it dry. Spray LIGHT coats on, and TAKE YOUR TIME. Let every coat dry before adding another. I used about 4-5 coats of paint, and 5 coats of clearcoat. After you paint, get the the finest sandpaper you can find, sand it down a little, touch up if needed, and add the clearcoat...you can see pics of my final project at my website, which is in my signature...