Page 1 of 1
Clutch Questions
Posted: April 15th, 2004, 12:25 pm
by MazdaMx3Driver
Can the Clutch and flywheel from a 2.5 ltr probe/mx6 be used on the mx3? aftermarket wise...
Re: Clutch Questions
Posted: April 15th, 2004, 12:26 pm
by Talon_66
Yes they are interchangeable, I believe the 2.5L Clutch and Flywheel are about 10mm larger in diameter, but they are interchangeable.
<small>[ April 15, 2004, 11:31 AM: Message edited by: Talon_66 ]</small>
Re: Clutch Questions
Posted: April 15th, 2004, 1:09 pm
by TsiMiata
Just the clutch is bigger, the flywheel is the same diameter. You can use a 1.8 flywheel with a 2.5 clutch or a 1.8 clutch on a 2.5 flywheel(all though I don't see why you would). It all swaps around.
Re: Clutch Questions
Posted: April 15th, 2004, 1:17 pm
by Talon_66
If u go to the Auto parts store and ask for the Ford Probe clutch, u will more then likely pay a lot less.
Re: Clutch Questions
Posted: April 15th, 2004, 9:59 pm
by papa roached
not to mention a "free" upgrade
Re: Clutch Questions
Posted: April 22nd, 2004, 10:22 am
by MazdaMx3Driver
well for the guy who said that it is cheaper for the probe clutch.. heh thats what my plan is.... the clutch/flywheel is about half the cost of the aftermarket mx-3 ones.. Cool that works out great.. saves me about 250 bones
thanks fellas
Re: Clutch Questions
Posted: April 22nd, 2004, 3:38 pm
by Talon_66
No problem. Good luck with the swap!