Page 1 of 1
Intake manifold.......so many choices.
Posted: February 3rd, 2002, 2:20 pm
by 93 mx-3 gs/se
I am shortly going to order a KL-ZE and put it in a 93 gs stick. I know the throttle body will hit the brake booster so I am considering the possibilities. There is the probe 2.5 KL-03 manifold, there is my 1.8 manifold but I think I will lose some power, yes/no? Then isn't there a MS800 manifold and a millienia manifold. I don't know anything about them. I have heard that they are expensive and hard to locate. I read on here that someone chopped and welded their KL-ZE manifold to make it fit by the brake booster. Any info you guys could give me would be great.
Re: Intake manifold.......so many choices.
Posted: February 3rd, 2002, 7:58 pm
by mrprecidia
IF YOU USE THE 1.8 MANIFOLD YOU WILL HAVE ALOT OF LOW END TORQUE BUT YOU WILL SACRAFICE PEAK HP. YOU CAN GET THE MS8 MANIFOLD FROM CORKSPORT THATS WHAT I AM RUNNING ON MY KL-ZE AND IT WORKS WELL.
Re: Intake manifold.......so many choices.
Posted: February 3rd, 2002, 8:26 pm
by ProtegeSTS
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by mrprecidia:<BR><STRONG>IF YOU USE THE 1.8 MANIFOLD YOU WILL HAVE ALOT OF LOW END TORQUE BUT YOU WILL SACRAFICE PEAK HP. YOU CAN GET THE MS8 MANIFOLD FROM CORKSPORT THATS WHAT I AM RUNNING ON MY KL-ZE AND IT WORKS WELL.</STRONG><HR></BLOCKQUOTE><P><BR>please lay off the capslock