Page 1 of 1
2.2 v6 turbo???
Posted: January 2nd, 2002, 10:08 pm
by hotroddinmazda
I was wondering if the 2.2 v6 turbo engine out of a 90 626 would bolt into a 95 mx-3 special edition? If so how much would it take to make such a swap?
Re: 2.2 v6 turbo???
Posted: January 3rd, 2002, 1:44 am
by Bri94GS
the 2.2 turbo is a 4 cylinder
Re: 2.2 v6 turbo???
Posted: January 3rd, 2002, 1:53 am
by ProtegeSTS
its a 2.2L stroker F-series motor. <P>and it wont bolt in to any MX-3....this being the case, its a custom affair, and cost will be determined by how well you want it to work, how much you can do yourself, and what you want out of it.<P>If you have a special edition, just do the swap to a KL, as its much easier.
Re: 2.2 v6 turbo???
Posted: January 3rd, 2002, 4:25 pm
by David Coleman
Ahh...the F2T.<BR>Even with big laggy turbos and boost cranked up, I've never seen one make any reasonable power after 5k RPM. They are torque MONSTERS...all low end. Which is cool, but not all that fast. <P>I'd estimate you could do it for around 3k USD, not including labour.