MX-3.com

HI, Not long bought 92 GS UK spec.<p>When locking or un-locking from the drivers door, the passenger side solenoid works but the drivers side solenoid will not, causing stress on the key as I am going against the solenoid, but I found a green wire in the consol that opperates both solenoids at once ok, from a previous alarm system that was fitted ?<p>The green wire if connected to 12V+ will lock both doors & windows via solenoids fine. If 0V will unlock both doors.<p>But using the key only The drivers side solenoid will not Work. I have to uncouple the drivers solenoid mechanicly to enable the key to work the lock correctly, as the drag is too much pulling the solenoid without power.<p>Hope this is clear.<p>Any help appreciated.
Thanks,
Phil.